aliphatic polyisocyanate (flexible HDI trimer) curing agent STD-N 3800
Product Types
PIC
HDI
Isocyanate
Polyisocyanurate
Aliphatic polyisocyanate
Crosslinkers
Polyisocyanate
Hardeners
Material
Coatings, paints & inks
Flexible, High functional, Elastic, Weather resistant, Solventborne
Applications
STD-N3800 is used primarily as a hardener component for lightfast, two-component polyurethane coating systems with high chemical resistance and weather stability, very good gloss retention and outstanding mechanical properties. Preferred combination partners are polyacrylate or polyester polyols.The primary field of application for coating systems based on STD-N3800 are air and heat-drying automotive OEM, automotive refinishing and transportation coatings, as well as industrial coatings and coatings for plastics.
Solubility / thinnability
STD-N 3800 is thinnable with esters, ketones and aromatic hydrocarbons such as ethyl acetate, butyl acetate, methoxypropyl acetate, acetone, methyl ethyl ketone, methyl isobutyl ketone, cyclohexanone, toluene, xylene and mixtures thereof. Compatibility with the listed solvents is generally good but the storage stability of the respective solutions should be tested. Only PU grade solvents should be used (max. 0.05 % water, free of reactive groups like hydroxyl or amino groups). Aliphatic hydrocarbons are unsuitable as solvents.STD-N 3800 should not be thinned to less than 40 % non-volatile content. With time, lower binder content can lead to turbidity and sedimentation.
Compatibility
STD-N3800 can generally be blended with the following products: aliphatic polyisocyanates such as STD-N 100. N 75. N 3200. N 3400. ultra N 3600 and STD-Z 4470; aromatic polyisocyanates such as STD-NL/ultra L, HL and IL/ultra IL; polyester polyols and polyacrylates. The compatibility of the combinations used in the formulation should always be tested, however. STD-N3800 is incompatible with branched polyester polyols such asSTD-651 and polyether polyols such asSTD1380 BT.
Storage
– Storage in original sealed STDcontainer.
– Recommended storage temperature: 0 – 30 °C.
– Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture. Storage at higher temperatures will result in increase of color and viscosity. Due to the raw materials used, the product can occasionally exhibit temperature-dependent turbidity. This turbidity can be reversed by thinning with solvents or heating carefully to max. 50 °C without adversely affecting the quality of the product.
Specification
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| NCO content | 11.0 ± 0.5 | % | M105-ISO 11909 | |
| Viscosity | at 23 °C | 6.000 ± 1.200 | mPa*s | M014-ISO 3219/A.3 |
| Color value (Hazen) | ≤ 80 | M017-EN 1557 | ||
| Monomeric HDI | ≤ 0.25 | % | M106-ISO 10283 |
Typical Values
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Viscosity | at 25 °C | approx. 5.500 | mPa*s | M014-ISO 3219/A.3 |
| Equivalent weight | approx. 382 | |||
| Flash point | approx. 235 | °C | DIN 22 719 | |
| Density at 20 °C | approx. 1.12 | g/ml | DIN EN ISO 2811 |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Fitness Equipment Powder | Introduction It is made of polyester resin and epoxy resin as the main base materials, and has the excellent decorative, mechanical properties and... |
 |
RAL6005/6018 green Polyester Powder coating | Application Schedule: Applied by electrostatic spraying gun that can provide negative tension of 60-80 kV. Curing schedule : 180-200ºC /10-1... |
 |
Flat Metal MT-049/92489 | Introduction No. MT-049/92489 Color Star (Silver) Surface Flat Metal System Polyester Scope of application Used... |
 |
PVF oil pipe coating | Product Introduction Used for automobile oil pipes. PVF coating characteristics: (PVF) coating is the abbreviation of polyvinyl fluoride (Polyvi... |
 |
Low Cure Powder Coating | Introduction We are a professional powder coating manufacturer specializing in Low Cure Powder Coating designed to deliver excellent finish qualit... |
Похожие товары
 |
Sucralose powder Food additive | Продавец: Shanghai Yifu Food Ingredients Co., Ltd | Sucralose, as a new generation of high-sweetness sweetener, has demonstrated comprehensive and ou... |
 |
Sucralose Purchase price | Продавец: Shanghai Yifu Food Ingredients Co., Ltd | Sucralose, as a high-sweetness, calorie-free, and highly stable artificial sweetener, enjoys wide... |
 |
Sucralose Partners, long-termCooperation | Продавец: Shanghai Yifu Food Ingredients Co., Ltd | Sucralose is currently a widely used high-potency sweetener globally. Its safety has been verifie... |
 |
Sucralose | Продавец: Shanghai Yifu Food Ingredients Co., Ltd | Sucralose is a high-sweetness agent obtained by replacing the hydroxyl groups at positions 4, 1',... |
 |
Sucralose | Продавец: Shanghai Yifu Food Ingredients Co., Ltd | Sucralose is a trichloro derivative of sucrose (4,1',6'-trichloro-4,1',6'-dideoxy-galactosucrose)... |
