Polyester powder coatings for indoor use MT-300
Product description
MT-300 is a series of polyester resin based thermo-setting powder coatings formulated using TGIC. The pigments used in the MT-300 series restrict the field of application of this powder coatings class to interior uses. MT-300 is designed for interior decoration such as, metal furniture, shop fittings, shelves, light fittings.
Powder properties
| Typical value | |
| Chemical Type | Polyester – TGIC |
| Density | 1.2 – 1.9 g/cm³, depending on colour and effect |
| Recommended film thickness | 60 – 90µm |
| Shelf life | 12 months below 30 ºC |
| Storage Conditions | (open boxes must be resealed) Dry, cool conditions |
| Curing schedule | 12-24 min at 180°C
8-16 min at 200°C 4-10 min at 210°C (at object temperature) |
Pre-treatment
Galvanised steel requires surface preparation by either multi-stage pretreatment using either zinc phosphate or chromate conversion or controlled sweep blasting. Depending on the type of galvanizing, degassing or use of anti-bubbling additives may be required – follow the procedural advice of the pretreatment supplier. Iron phosphate and particularly Zinc phosphating of ferrous metals improves corrosion resistance. Aluminium substrates may require a chromate conversion coating.
Application
Powders can be applied by manual or automatic electrostatic spray equipment. A good protection is linked with the recommended film thickness. Bonded products have better application properties than blended products (more stable) but attention should still be paid to line settings in order to avoid “marble effect”and changes in aspect after recycling. Different substrates (aluminium, steel, galvanized steel…), use of primer, and big changes in film thickness may give a different aspect. Products with different codes should not be mixed even if same colour and gloss. It is recommended that for consistent application and appearance product be fluidized during application. MT-300 powder coatings can be applied by corona electrostatic or tribostatic equipment. However, the aspect obtained by tribo static equipment may vary when compared to electrostatic application and/or our color card.
Test conditions
Actual product performance will depend upon the circumstances under which the product is used. Testing has been determined under laboratory conditions using the following application properties and is for guidance only.
| Pre-treatment | Zinc Phosphate |
| Substrate | Polished steel |
| Curing schedule | 12 min at 200°C (object temperature) |
| Film Thickness | 60 – 70µm |
Mechanical tests
| Typical value | Method/standard | |
| Adhesion | Class 0 | ISO 2409 (2 mm Crosshatch) |
| Erichsen cupping | Pass 5 mm | ISO 1520 |
| Flexibility | Pass 5 mm | ISO 1519 |
| Hardness | Pass – no penetration to substrate | ISO 1518-1 (2000g) |
| Impact resistance | ≥30 kg.cm | ISO 6272-2 (d/r) |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
|
|
Automotive Powder Coating | Introduction We are a leading Chinese powder coating factory with over 20 years of export experience, supplying high-quality coatings to automotiv... |
|
|
Metallic sand texture matte MT-049/7C000 | Introduction No. MT-049/7C000 Color Gray Surface Metallic sand texture matte System Polyester Scope of applicati... |
 |
Polymeric Isocyanate Desmodur 44V20 | General Properties and Applications Desmodur44V20 is a liquid, dark brown polymeric isocyanate based on diphenylmethane-4.4′-diisocyanate (M... |
 |
Aluminum wheel hub powder coating series | Product description Our company’s aluminum wheel hub powder coating is a series of products specially designed for the characteristics of wh... |
 |
Titanium dioxide STD-2588 | Product Features STD-2588 is a rutile titanium dioxide pigment specifically designed for plastic applications. It features a strong bluish underto... |
Похожие товары
 |
Aluminium Garden Ornaments | Продавец: LianJiang Metals Company | Aluminium Garden Ornaments Aluminum garden ornamentsare decorative pieces made of aluminum that ... |
 |
Powder Coating for Automotive Bodies | Продавец: Standard International Group (HK) Limited | Powder Coating for Automotive Bodiesis a weather-resistant pure polyester powder coating series d... |
 |
Powder Coatings for Agricultural and Construction Machinery | Продавец: Standard International Group (HK) Limited | Powder Coatings for Agricultural and Construction Machineryis an ultra-weather-resistant polyeste... |
 |
Powder Coatings for Agricultural and Construction Machinery MT-601 | Продавец: Standard International Group (HK) Limited | Powder Coatings for Agricultural and Construction Machinery MT-601is an outdoor polyester powder ... |
 |
Powder Coating for Agricultural and Construction Machinery MT-602 | Продавец: Standard International Group (HK) Limited | Powder Coating for Agricultural and Construction Machinery MT-602is an outdoor polyester powder c... |
