Imitation porcelain light luxury home decoration powder

• 

Scope of application:

High-end aluminum alloy building profiles, doors and windows, furniture, hardware, etc.

Surface effect of anti-porcelain swimming coating

The surface of the coating is delicate and smooth, and the feel is smooth

Excellent adhesion through 50kg.cm positive and negative impact

Green and environmentally friendly, reducing costs

Guide to use

Curing conditions:

210℃/12min; In order to make the coating of the coated object cure evenly and the gloss stable, it is best to use an oven with uniform temperature distribution and a faster heating rate; and reasonably control the curing temperature and time according to the situation of the workpiece.

Pretreatment:

The workpiece must be pretreated before spraying, and it must comply with the provisions of Chapter 5 of GB/T 8013.3-2007. The mass of the chromate conversion film should be between 0.4 and 1.0 g/㎡. The time interval between chemical conversion pretreatment and coating should not exceed 16 hours. In principle, coating should be applied immediately after the conversion treatment is dry.

Workpiece hanging:

When hanging the workpiece, hang it reasonably according to the shape and thickness of the workpiece to improve the powdering rate and yield; and pay attention to keeping the spraying system and the surrounding environment clean to prevent different brands of powder coatings from mixing and affecting the surface effect of the coating.

Powder spraying:

Choose reasonable process parameters, control the voltage, air pressure and powder output. The powder spraying environment should preferably have a temperature and humidity control system. The optimal powder spraying temperature is 15-25℃, and the relative air humidity of the powder spraying room is preferably 45%-55%; in addition, the proportion of recycled powder should be controlled to ensure the color stability of the product.

The recommended coating thickness is 50-80um, otherwise it will affect the coating performance.

During the film formation process, the color will be slightly affected by process conditions such as temperature and thickness. It is recommended that users conduct tests before use to achieve satisfactory results.

Performance index

Remarks: The accelerated aging requirements for bright color coatings such as black, yellow, and orange shall be agreed upon by both the supplier and the buyer and shall be stated in the contract.

Packaging and storage

The outer packaging of powder coating is a hard carton lined with a plastic bag, with a net weight of 25KG and 20KG per box. It should be stored in an environment with a temperature below 25℃ and avoid exposure to light or heat. The location where the powder is stored is not allowed to be close to fire and away from heat sources.

Safety measures

This product is non-flammable and explosive, basically non-toxic, and must not be ingested.

Другие товары поставщика

	Low-Gloss Powder Coatings-Subtle Durable	Introduction Our low-gloss powder coatings are ideal for a wide range of applications, including furniture, appliances, automotive parts, metal pa...
	Morandi series powder coating	Place of Origin China Main Raw Material Polyester/Epoxy/Epoxy-Polyester Usage Appliance Paint, Building Coating, Boat Paint, Car Paint, Furnit...
	Henan Shangqiu Jianye Headquarters Port powder coating	Characteristics of powder coatings 1. The coating film is flat and smooth; 2. The paint film has good physical and mechanical properties, especia...
	Metallic flat matte MT-049/95586	Introduction No. MT-049/95586 Color White Surface Metallic flat matte System Polyester Scope of application Lig...
	Epoxy Anti-Corrosion Powder Coating for Safe Drinking Water Pipes	Product Introduction:This product is formulated using special epoxy resin, dedicated curing agents, nano-grade antimicrobial agents, and food-grade...

Похожие товары

	High Concentration Plastic Color Masterbatch Factory Direct Supply	Продавец: 861445	We are a professional color masterbatch manufacturer with years of R&D experience in plastic ...
	Acid Ink Blue G Factory	Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD	Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ...
	Acid Black ATT Factory	Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD	Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o...
	Acid Black 10B Factory	Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD	Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri...
	Sulphur Dyes	Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD	Sulphur Dyes BuyDye supplies a range of sulphur dyes for cotton-based textile dyeing, includ...