Anodized Powder Coating

• 

Introduction：

It is suitable for anodic oxidation effect for product appearance, as well as environmental protectionrequirements such as Rohs and Reach.

Coating characteristics:

Good adhesion, excellent mechanical properties,tough coating film.

Coating film is Smooth and glossy

Good outdoor endurance

Excellent resistance to excessive baking

Application:

Suitable for a variety of products decoration and protection, such as: aluminum curtain wall, door and window frame, ceiling, etc

Spraying method:

high voltage electrostatic sprayin60-80KV

Recommended filmthickness:

60-80 um

Application parameters

Curing time

200Cx10–15mins

Standard Test Method For Itemizer：

In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um,and the performance index of .the film would change slightly with different gloss.

This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and otherheavy metals, and meets RoHS requirements.

Storage conditions: dry at about 35°C, stored in the ventilated room, avoid direct sunlight. Under these conditions, thepowder can be stored for 12 months, product can still be used after re -examined to be in good condition evenif it isfound to be expired.

Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and donot represent the performance commitment of the product application.

The results vary with environmental factors and other conditions.

If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Другие товары поставщика

	Chromium(III) phosphate STD-CP 4295	Chemical Structure Chromium(III) phosphate Anticorrosive pigment providing adhesion promotion based on Chromium(III) phosphate. Often used in co...
	Thin Coating Powder Series/extreme powder coating	Key Features & Specifications FeatureSpecification / Benefit Ultra-Thin Film Formation Achieves30–50μm film thicknesswhil...
	Silicon Dioxide STD	Technical Data Properties Units Target Values(SpecLimits) Test results Silicon dioxide content (dry product) % ≥98 99.7 L...
	Anhydride Cured Epoxy Powder Coating	Engineered Surface Solutions for Every Application Powder coatings are formulated with different resin bases to meet diverse performance, aestheti...
	Soft Starry Grey powder coating	Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,...

Похожие товары

	Trimellitic anhydride 97%	Продавец: Yufeng International Group Co., Ltd	Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a...
	Isobutyric Anhydride CAS 97-72-3	Продавец: Yufeng International Group Co., Ltd	Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo...
	Isobutyric Acid CAS 79-31-2	Продавец: Yufeng International Group Co., Ltd	Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met...
	2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5	Продавец: Yufeng International Group Co., Ltd	AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and...
	Dimethyl sulfoxide (DMSO) CAS: 67-68-5	Продавец: Yufeng International Group Co., Ltd	Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture...