Epoxy Anti-Corrosion Powder Coating for Firefighting Steel Pipes

• 

Product Introduction:

This product is formulated using linear phenolic epoxy resin, polyurethane-modified epoxy resin, and advanced curing agents, designed and manufactured based on a new formulation concept. It features high reactivity, strong adhesion, high cross-link density, and excellent resistance to chemicals, solvents, cathodic disbondment, as well as superior flexibility, impact resistance, and high-temperature resistance.

Product Features:

Excellent adhesion to the substrate.

Strong anti-corrosion capability.

Good leveling, high gloss, and dense coating.

Superior high-temperature cathodic disbondment resistance.

Extremely strong flexibility, capable of passing the 4/5 flattening and post-grooving tests.

Good performance in withstanding high and low temperatures.

Strong resistance to boiling water.

Powder Coating Performance Parameters：

Cured Powder Coating Performance Parameters：

Compliance Standards:

GB/T 5135.20-2010; CJ/T 120-2008

Application Fields:

Anti-corrosion coating for internal and external surfaces of water supply pipes used in firefighting.

Application Processes:

Spraying, dip coating, etc.

Precautions:

The steel pipe surface should be free of oil and moisture; the surface treatment quality should reach Sa2 1/2 level (GB/T 8923); the anchor pattern depth should be 50-90 mm; dust and abrasives on the steel pipe surface should be blown clean. Preheating temperature should be controlled between 180-240°C.

The product should be stored in a well-ventilated, dry indoor environment with a temperature below 30°C, away from heat sources, corrosive chemicals, and chemical solvents, and protected from strong light exposure. The stacking height should not exceed four layers. Avoid long-term pressure and ensure the packaging box is sealed to prevent caking and moisture, which can affect fluidization performance.

To ensure thorough curing of the epoxy coating and better anti-corrosion performance, it is recommended to preheat the steel pipe surface to above 200°C to improve the curing completion rate.

Другие товары поставщика

	Outdoor 10-year warranty high weather-resistant wood grain powder	Surface Finish Options Overview Introduction Complete range of products with rich colors. Orders can be placed directly according to PANTONG /...
	Profile powder	Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according t...
	Polyester/TGIC powder coating series	Made of polyester resin and TGIC curing agent as the main raw materials. Features: —Good adhesion, excellent mechanical properties, tough c...
	Insulating Powder Coating	Product Features: High electrical insulation properties, with a large resistance coefficient and low dielectric constant, meeting the requirements...
	Metallic flat matte MT-049/96190	Introduction No. MT-049/96190 Color Metallic color Surface Metallic flat matte System Polyester Scope of applica...

Похожие товары

	5.4,4'-Oxydiphenol CAS 1965-09-9	Продавец: Yufeng International Group Co., Ltd	Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-...
	1,1,2,2-Tetrachloroethane CAS 79-34-5	Продавец: Yufeng International Group Co., Ltd	Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te...
	3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9	Продавец: Yufeng International Group Co., Ltd	Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,...
	2.1,1,2-Trichloroethane CAS 79-00-5	Продавец: Yufeng International Group Co., Ltd	Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-...
	1.1,1,2,2-Tetrachloroethane CAS 79-34-5	Продавец: Yufeng International Group Co., Ltd	Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te...