Powder coating for automobile wheels MT-Al00
Product Overview:
Special powder coating for wheels (rims), a series of epoxy polyester powder coating products specially designed for the characteristics and requirements of wheel base and topcoat.
Coating characteristics:
—Strong adhesion
—Excellent leveling
—High air permeability
—Good salt spray resistance
Application:Suitable for automotive aluminum wheels and steel rims
Application parameters:
Curing time: 180℃~200℃, 10~15 minutes
Spraying method: High-voltage electrostatic spraying 60~80KV
Coating performance:
| Project | Instrument | Judgment standard | Test standard |
| Pencil hardness | Pencil hardness tester | 1H | GB/T 6739
ASTM D3363 |
| Impact resistance | Impact tester | 50 kg.cm (8mm diameter)
2.5Nm (16mm diameter) (20mm diameter) |
GB/T 1732 ASTM D 2794 ISO 6272 |
| Bending resistance | Bending tester | W 2mm (cylindrical shaft)
Conical shaft bending Cylindrical shaft |
GB/T 6742 ASTM D 1737 ISO 1519 |
| Adhesion | Hundred grid test | Grade 0 | GB“ 9286 ISO 2409 ASTM D 3359 |
| Salt spray resistance | NSS salt spray | &1000H, WbS2mm | GB/T 1771 ASTMB-117 ISO 7253 |
| Cupping | Cupping instrument | & 6 mm | GB/T9753 ISO 1520 |
•The above tests are all conducted on 0.8mm degreased and derusted cold-rolled steel plates, with a coating thickness of 60~80um. The performance indicators of the coating will vary slightly with the gloss.
Environmental protection requirements: This product does not contain heavy metals such as chromium, selenium, lead, hexavalent chromium, mercury, lock, cadmium, etc., and fully complies with ROHS2.0 environmental protection requirements.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Tricresyl Phosphate MT-T306 | Product details Reference dosage: 0.5-3.0 (mass fraction) / % Quality standard: Appearance Clear oily liqui... |
 |
Polyester resin based thermo-setting powder coatings MT-300 AM | Product Description MT-300 AM is a series of polyester resin based thermo-setting powder coatings formulated using TGIC. The pigments used in the ... |
 |
Insulating Powder Coating | Product Features: High electrical insulation properties, with a large resistance coefficient and low dielectric constant, meeting the requirements... |
 |
Powder coating primer containing zinc MT-PZ ALZ55N | Product Description MT-PZ is a powder coating primer containing zinc which is designed to give enhanced corrosion protection of mild steel. This d... |
 |
Polyester Powder Coating | Product Introduction:This series of products is a thermosetting powder coating made from a mixture of saturated polyester resin, corresponding curi... |
Похожие товары
 |
Epimedium Extract | Продавец: Fruit Powder,Vegetable Powder | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | Продавец: Fruit Powder,Vegetable Powder | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | Продавец: Fruit Powder,Vegetable Powder | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
 |
Pomegranate Powder | Продавец: Fruit Powder,Vegetable Powder | Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance... |
 |
Orange Powder | Продавец: Fruit Powder,Vegetable Powder | Product Name: Orange PowderLatin Name: Citrus sinensisUsed Part: Fruit juiceAppearance: Light yel... |
