.

Blue flash silver color powder coating

COLORS AVAILABLE

RAL colors coating powder

Pantone colors

Color-matching regarding customer requirement is available

GENERAL TYPES

Polyester /Hybrid powder coating

Epoxy Powder coating color

Metallic powder coating color

Hammer tone color powder coating

Texture color powder coating powder

Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.

PHYSICAL PROPERTIES

Specific gravity :1.2 ~1.8g/cm3 up to colors

Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)

Level of liquidity:24 ~27 mm

CURING CONDITIONS

180 °C ~200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE

8-12 square meters /kg, thickness 60 microns (100% of the powder coating utilization rate).

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6months.Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is anon-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

Mechanical property
Testing items Standards and methods Inspecting index
Impact strength GB/T1732-1993. AS3715 2.8 >50kg/cm
Bending resistance GB/T1185-88. AS1580 402.1. ISO9227 Pass 2-5 millimeters
Adhesion CHECKED TEST GB/T9286-88.2mm Cross cut, ISO2409 Pass100/100. passes 0levels
Cupdrawing:Erichsen, ISO1520 Erichsen, ISO1520 Pass 3-7 millimeters
Pencil hardness GB/T6739-86 Pass H-2H
Chemical resistance and weather resistance
Salt spray test GB/T1771-91.500 hours The cross section of corrosion less than 2MM
Hot and damp resistance test GB/T,1000 hours Without air bubbles, loses the light slightly
Acid resistance 10% CH3COOH, 240 hours Without air bubbles, the surface without damage
Alkali resistance 10% NaOH, 240 hours Without air bubbles, the surface without damage
Heat resistance 200degree,1 hour The color change is lower than E=1.5
Solvent resistance MEK24 hours soaked in solvent-free Without air bubbles, the surface without damage
Uvioresistant QUV-313.500 hours Gloss higher than 80% lower than the

Munsell color change level

Water tolerance of 2 hours No bubble, not falling, losing light

If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

High-performance corrosion protection powder coating
High-performance corrosion protection powder coating High-performance powder coatings for corrosion protection. MT’s primer product portfolio is designed to provide high corrosion resistance fo...
PVF steel drum coating
PVF steel drum coating PVF steel drum coating is mainly used for packaging containers of chemical pesticide products, inner walls of cans and other special anti-corrosion...
Outdoor quality-warranty weather-resistant wooden transfer powder coating
Outdoor quality-warranty weather-resistant wooden transfer powder coating Introduction Standard transfer water-grain primer uses imported weather-resistant polyurethane PU system, which has the advantages of high lev...
Metallic flat matte MT-019/74639
Metallic flat matte MT-019/74639 Introduction No. MT-019/74639 Color Gray Surface Metallic flat matte System Weather-resistant polyester Scope of...
Highly chemical resistant powder coatings
Highly chemical resistant powder coatings Product description MT-EC 1301 is a series of high-performance polyurethane powder coatings formulated in order to provide excellent anti-graffiti...
Все товары поставщика

Похожие товары

Sucralose powder  Food additive
Sucralose powder Food additive Продавец: Shanghai Yifu Food Ingredients Co., Ltd Sucralose, as a new generation of high-sweetness sweetener, has demonstrated comprehensive and ou...
Sucralose Purchase price
Sucralose Purchase price Продавец: Shanghai Yifu Food Ingredients Co., Ltd Sucralose, as a high-sweetness, calorie-free, and highly stable artificial sweetener, enjoys wide...
Sucralose Partners, long-termCooperation
Sucralose Partners, long-termCooperation Продавец: Shanghai Yifu Food Ingredients Co., Ltd Sucralose is currently a widely used high-potency sweetener globally. Its safety has been verifie...
Sucralose
Sucralose Продавец: Shanghai Yifu Food Ingredients Co., Ltd Sucralose is a high-sweetness agent obtained by replacing the hydroxyl groups at positions 4, 1',...
Sucralose
Sucralose Продавец: Shanghai Yifu Food Ingredients Co., Ltd Sucralose is a trichloro derivative of sucrose (4,1',6'-trichloro-4,1',6'-dideoxy-galactosucrose)...