Antimicrobial Powder Coatings
Product performance:
long term Up to 4N- 5N
(99.99-99 .999%)
Application:
kitchen utensils: dishwasher, stove, cupboard, etc
Household appliances: refrigerator, freezer, water dispenser, microwave oven, etc
Medical equipment: medical beds, etc
Spraying method:
high voltage electrostatic sprayin 60-80KV
Recommended film thickness:
60-80 um
Application parameters
Curing time
200°Cx10–15mins
STANDARD TEST METHOD FOR ITEMIZER
In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um,and the, performance index of the film would change slightly with different gloss.
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and otherheavy metals, and meets RoHS requirements .
Storage conditions: dry at about 35°C, stored in the ventilated room, avoid direct sunlight. Under these conditions, thepowder can be stored for 12 months, product can still be used after re- examined to be in good condition even if it is foundto be expired.
Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and donot represent the performance commitment of the product application.
The results vary with environmental factors and other conditions.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Polyester powder coatings for indoor applications with antimicrobial technology MT-310 AM | Product description MT-310 is a series of polyester resin based thermo-setting powder coatings, without TGIC with specific antimicrobial activity.... |
 |
High-Temperature Resistant Powder Coating | Product Introduction: High-temperature resistant coatings are typically defined as those whose films do not change color, do not flake off, and ca... |
 |
Transfer printing powder coatings | Introduction Transfer printing powder coatings are advanced decorative coatings that allow for the application of intricate patterns and designs o... |
 |
Metallic flat matte MT-629/94810 | Introduction No. MT-629/94810 Color White Surface Metallic flat matte System Super weather-resistant polyester S... |
 |
Soft Coral Gold powder coating/powder coating for engineering projects | Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,... |
Похожие товары
 |
5.4,4'-Oxydiphenol CAS 1965-09-9 | Продавец: Yufeng International Group Co., Ltd | Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-... |
 |
1,1,2,2-Tetrachloroethane CAS 79-34-5 | Продавец: Yufeng International Group Co., Ltd | Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te... |
 |
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9 | Продавец: Yufeng International Group Co., Ltd | Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,... |
 |
2.1,1,2-Trichloroethane CAS 79-00-5 | Продавец: Yufeng International Group Co., Ltd | Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-... |
 |
1.1,1,2,2-Tetrachloroethane CAS 79-34-5 | Продавец: Yufeng International Group Co., Ltd | Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te... |
