Basecoat powder coating

• 

Product Description

MT-A2204 basecoat comes in an array of metallic finishes, which offer enhanced exterior durability with the application of a super-durable polyester clearcoat. These advanced systems incorporate proprietary technology to protect and extend the life of these metallics. These MT-A2204 basecoat powders are moisture and stain resistant, chemical and chip resistant durable, and built to last in the most challenging environments.

Powder Properties

Test Conditions

The results are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.

Pre-treatment

Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application of MT-A2204 basecoat. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance. Aluminium parts require a chromate conversion pre-treatment.

Application

MT-A2204 basecoat powders can be applied by manual or automatic electrostatic spray equipment. Tribo application is not recommended. It is recommended that for consistent application and appearance product be fluidized during application. MT-MW188I must be fully cured otherwise there may be a loss of metallic effect or discoloration of the clear topcoat. MT-MW188I is not stabilized for direct gas fired ovens.

• All coated pieces should be handled with clean lint free gloves.

• Parts should not be stored in an environment with high humidity.

• Clear coat should be applied as soon as possible after metallic application (maximum time between coats is 8 hours)

• Parts should not be passed through a pre-treatment process prior to application of the clear coat Despite the fact that MT-MW188I is a bonded metallic it is not recommended to recycle the powder.

Другие товары поставщика

	PVF oil pipe coating	Product Introduction Used for automobile oil pipes. PVF coating characteristics: (PVF) coating is the abbreviation of polyvinyl fluoride (Polyvi...
	Cellulose ether STD20000S	Product Description This product is developed to improve the workability of cement- or gypsum-based dry-mix mortars. It can be used in plastering,...
	Anti-graffiti powder coating	Brief description This series of products is based on saturated hydrocarbon polyester resin and isocyanate curing agent as the main base material,...
	Skin-Feel Powder Coating	Key Features & Specifications FeatureSpecification / Benefit Skin-Like Texture Coating surface replicatessoft, delicate touchakin ...
	Powder coatings for Automotive trim parts MT-A2201/MT-YZ204I	Product Description MT- A2201 clearcoats can be used for pillars and appliqués, roof racks, grille guards, bumpers, and mirror housings, al...

Похожие товары

	Epimedium Extract	Продавец: Fruit Powder,Vegetable Powder	Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ...
	Pumpkin Powder	Продавец: Fruit Powder,Vegetable Powder	Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ...
	Broccoli Powder	Продавец: Fruit Powder,Vegetable Powder	Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who...
	Pomegranate Powder	Продавец: Fruit Powder,Vegetable Powder	Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance...
	Orange Powder	Продавец: Fruit Powder,Vegetable Powder	Product Name: Orange PowderLatin Name: Citrus sinensisUsed Part: Fruit juiceAppearance: Light yel...