Imitation porcelain light luxury home decoration powder/powder coating for overseas

• 

Scope of application:

High-end aluminum alloy building profiles, doors and windows, furniture, hardware, etc.

Surface effect of anti-porcelain swimming coating

The surface of the coating is delicate and smooth, and the feel is smooth

Excellent adhesion through 50kg.cm positive and negative impact

Green and environmentally friendly, reducing costs

Guide to use

Curing conditions:

210℃/12min; In order to make the coating of the coated object cure evenly and the gloss stable, it is best to use an oven with uniform temperature distribution and a faster heating rate; and reasonably control the curing temperature and time according to the situation of the workpiece.

Pretreatment:

The workpiece must be pretreated before spraying, and it must comply with the provisions of Chapter 5 of GB/T 8013.3-2007. The mass of the chromate conversion film should be between 0.4 and 1.0 g/㎡. The time interval between chemical conversion pretreatment and coating should not exceed 16 hours. In principle, coating should be applied immediately after the conversion treatment is dry.

Workpiece hanging:

When hanging the workpiece, hang it reasonably according to the shape and thickness of the workpiece to improve the powdering rate and yield; and pay attention to keeping the spraying system and the surrounding environment clean to prevent different brands of powder coatings from mixing and affecting the surface effect of the coating.

Powder spraying:

Choose reasonable process parameters, control the voltage, air pressure and powder output. The powder spraying environment should preferably have a temperature and humidity control system. The optimal powder spraying temperature is 15-25℃, and the relative air humidity of the powder spraying room is preferably 45%-55%; in addition, the proportion of recycled powder should be controlled to ensure the color stability of the product.

The recommended coating thickness is 50-80um, otherwise it will affect the coating performance.

During the film formation process, the color will be slightly affected by process conditions such as temperature and thickness. It is recommended that users conduct tests before use to achieve satisfactory results.

Performance index

Remarks: The accelerated aging requirements for bright color coatings such as black, yellow, and orange shall be agreed upon by both the supplier and the buyer and shall be stated in the contract.

Packaging and storage

The outer packaging of powder coating is a hard carton lined with a plastic bag, with a net weight of 25KG and 20KG per box. It should be stored in an environment with a temperature below 25℃ and avoid exposure to light or heat. The location where the powder is stored is not allowed to be close to fire and away from heat sources.

Safety measures

This product is non-flammable and explosive, basically non-toxic, and must not be ingested.

Другие товары поставщика

	Super-hardness baking porcelain powder coating	Properties of Porcelain Powder Coating ProjectsPorcelain steel plateWater-painted porcelain aluminum platePowdered porcelain aluminum plate ...
	Titanium dioxide STD-2589	Introduction： STD-2589 is an economical rutile titanium dioxide product manufactured using the sulfuric acid process. It is an uncoated and organi...
	Anodized Powder Coating-coating powder manufacturer	It is suitable for anodic oxidation effect for product appearance, as well as environmental protectionrequirements such as Rohs and Reach. Coating...
	Electrical Appliance Powder Coating	Aesthetic and Functional Excellence: The coating provides an aesthetically pleasing and uniform finish with excellent weather resistance. The gloss...
	Metallic flat matte MT-049/95586	Introduction No. MT-049/95586 Color White Surface Metallic flat matte System Polyester Scope of application Lig...

Похожие товары

	Trimellitic anhydride 97%	Продавец: Yufeng International Group Co., Ltd	Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a...
	Isobutyric Anhydride CAS 97-72-3	Продавец: Yufeng International Group Co., Ltd	Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo...
	Isobutyric Acid CAS 79-31-2	Продавец: Yufeng International Group Co., Ltd	Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met...
	2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5	Продавец: Yufeng International Group Co., Ltd	AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and...
	Dimethyl sulfoxide (DMSO) CAS: 67-68-5	Продавец: Yufeng International Group Co., Ltd	Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture...