Sodium Silicate Sand Casting
Sodium silicate sand castingis soluble in water in various amounts. A more common name for sodium silicate is water glass, which is used in iron or steel sand casting. The water glass works as a binder of the sand. Using sodium silicate sand binderallows the rapid production of a strong sodium silicate castingmold, by CO2 through the mixture of sand and sodium silicate in the mold, which hardens it almost instantly. The process is called sodium silicate co2 molding. Sodium silicate is a generic name for chemical compounds with the formula Na2SiO3. This material is generally colorless transparent solids, or in white powder, non-toxic and non-inflammable.
Sodium Silicate Casting Products Properties
dimension tolerance ±0.5mm, CT7~8;
surface finish Ra3.2;
wall thickness up to 7mm;
unit weight extent 1~20000kg;
unit size limitation of 0.03~3.5 meter;
degree of complexity- complex;
machining required- normal;
production lead time- short;
production cost- low.
What is sodium silicate Moulding?
Though in most conditions, sodium silicate is one of the types of sand casting and considered to be applied in sodium silicate sandcasting. Actually it also could be applied in the sand casting. Besides, sodium silicate sand casting is more suitable to make large and complex structures with an even better surface finish and fewer defects.
Sodium Silicate Molding Processand Principle
Sodium silica sand castingprocess can be divided into the following detailed steps:
Melt the glass and mold it through the mold.
Generally, realize that after the sodium silicate casting mold is made.
The glass melt is injected into the sodium silicate casting mold or realizes that the pre-made mold is stacked with glass scrap in the mold.
Put into the furnace together with the mold for melting.
Anneal the sodium silicate sand casting mold with the glass domain anastomosis after molding.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Low Pressure Die Casting | The low pressure die casting is to let the melted metal flow into the casting mold under a certain degree of pressure, and solidify the casting par... |
 |
Brass，Bronze，Copper Casting | As defined by its main properties, copper offers excellent electrical and heat conductivity, and good corrosion resistance ability as well. But nat... |
 |
Semi-Solid Die Casting | Based on the theory of stir cast invented by Mr. D.B. Spencer and M.C.Flemings, the semi-solid die casting technic has been further developed and a... |
 |
Lost Wax Investment Casting | The lost-wax casting process can differ depending on the application and the requirement, but it generally consists the following steps: Molde-maki... |
 |
Stainless Steel Investment Casting | The stainless steel has much better physical properties then iron and normal steel, but it possesses worse casting properties. Because the stainles... |
Похожие товары
 |
Room Temperature Vulcanized Silicone Rubber | Продавец: Zhongtian East Fluorine Silicon Material Co., Ltd | Product Name: room temperature vulcanizing silicone（Methyl RTV 107/OH Polymer） Molecular Formu... |
 |
Polydimethylsiloxane | Продавец: Zhongtian East Fluorine Silicon Material Co., Ltd | Name: Hydroxy Terminated Polydimethylsiloxane(Methyl Silicone Oil) Melt Point (℃): -59 Spon... |
 |
Octamethylcyclotetrasiloxane (D4) | Продавец: Zhongtian East Fluorine Silicon Material Co., Ltd | Product Name: D4 Silicone Octamethylcyclotetrasiloxane Molecular Formula: (CH3 ) 8 Si4 O4 O... |
 |
Mixing Silicone Rubber | Продавец: Zhongtian East Fluorine Silicon Material Co., Ltd | Mixing Silicone Rubber Usage: it can be used for pressing buttons, o-ring, sealing gasket, sha... |
 |
Methyl Vinyl Silicone Rubber | Продавец: Zhongtian East Fluorine Silicon Material Co., Ltd | Name: Methyl Vinyl Silicone Rubber Feature: High temperature resistant Appearance: ... |
