Core barrel with high performance rock roller bit for Pile Foundation

• 

Overview of Core Barrel Roller Bit

Cangzhou Great Drill Bits Co.,Ltd.is one of the drill bit manufacturers in China. Its roller bit core barreluses high carbon steel and a special bit Angle to maintain drilling strength and efficiency.

There are three types of core barrels:

1. Core barrel with bullet teeth is used for cutting an annular ring in rock or concrete(also reinforced concrete).

2. Core Barrel with roller bits is used in very strong rock formations(compressive strength >100Mpa).

3. Cross cutter core barrel is mainly used to break rock cores that remain in the borehole after using a core barrel, also suitable for drilling hard, jointed rock(<100Mpa) and for penetrating through layers containing boulders.

Applicable layers: dense sand, gravel, and medium hard rocks, etc..

The Advantage of Core Barrel Roller Bit

The reaming bit consists mainly of four or more cones. The main cutting teeth are new wear-resistant alloys for tungsten carbide inserts and steel teeth. The new formula and the new process of high-quality tungsten carbide teeth improve the service life of the reaming drill. The guide is a cone drill bit or a scraper drill bit.

The bearing seal uses high-performance O-ring seal or metal seal bearing and special grease for imported drill bit.

Special inserts are placed on the outer diameter of the head to reduce the wear of the head during the formation of abrasives in directional and horizontal wells, prolonging the life of the drill.

Replacing Cutters and Cutting Cost-On most Hole Opener designs, the cutters can be easily replaced. The cost to replace a cutter is a fraction of the cost to replace a large tricone rock bit.

Другие товары поставщика

	Matrix Body PDC Bit For Oil Well Drilling Hard Rock	Overview of Matrix Body PDC Bit GM1605T Matrix body PDC bit GM 1605T is made by Tungsten carbide powder, this type of matrix body bit is very high...
	PDC cutters used for PDC bit, PDC hole opener, PDC reamer	Overview of PDC Cutter PDC cuttersare made of diamond micro-powder and cemented carbide substrate sintered under ultra-high pressure and high te...
	Sitemap	Cangzhou Great Drill Bits Co.,Ltd. Last updated: 2022/08/12 Home The Drill Bits Series We Offer Downhole motor PDC Bit Hybrid Drill Bit Trico...
	PDC Drill Bit	PDC drill bit is short for Polycrystalline Diamond Compact bit. The other name for the PDC drill bit is Diamond bit. As one of the most professiona...
	PDC cutters used for PDC bit, PDC hole opener, PDC reamer	Overview of PDC Cutter PDC cutters are made of diamond micro-powder and cemented carbide substrate sintered under ultra-high pressure and high tem...

Похожие товары

	PDC DRAG BIT	Продавец: WUHAN SML TOOLS LIMITED	The PDC drilling drag bit consists of four parts: the bit body, the scraper blade, the water divi...
	PDC CUTTER	Продавец: WUHAN SML TOOLS LIMITED	Artificial PDC cutter is composed of a layer of polycrystalline diamond cutters and carbide matri...
	PDC CORE BIT	Продавец: WUHAN SML TOOLS LIMITED	PDC core bits, also called hollow bits, are a kind of thin tubular multi-tooth bits with carbide ...
	PDC BIT	Продавец: WUHAN SML TOOLS LIMITED	Big blade design: The blades of all PDC drilling series are raised and increased. Using oversized...
	Matrix PDC Drill Bit	Продавец: WUHAN SML TOOLS LIMITED	PDC matrix bit is a kind of cutting bit that weld the diamond composite piece on the drill head b...