MATRIX PDC BIT

• 

PDC bit is the abbreviation of Polycrystalline Diamond Compact Bit, also known as Polycrystalline Diamond Cutting Block Bit or Composite Chip Tooth Bit. The bit body of the matrix body pdc bitsis sintered by the same method and process as the sintered natural diamond bits and TSP bits with cast tungsten carbide powder, leaving a nest on the working surface of the bit when sintering, and then welding the composite piece directly on the nest. PDC bit has been widely used in oil drilling for its advantages of fast drilling speed, long life and high feed rate.

Features Of Matrix PDC Bit

The upper part of the Matrix PDC Bit is made of steel and the lower part is made of tungsten carbide wear-resistant alloy. The PDC cutting teeth are welded to the pre-set grooves of the body with low temperature welding material. The tungsten carbide body has high hardness and is resistant to erosion, so the Matrix PDC bit has long life and high feed rate, and is widely used.

The matrix body pdc drill bitis mainly used for difficult to drill formations with high gravel and compressive strength. Its own strength is higher than that of steel body bits.

Matrix PDC bithave high hardness and wear resistance of cutting teeth due to the use of polycrystalline diamond composite as cutting element.

Production And Use Of Matrix PDC Bits

Production method:

The Matrix PDC bits are made of various plastron powders and metal steel frames sintered in the mold at a temperature of 1000-15000 degrees, and then butt-welded to the joint. The shape of the casing, i.e. the working profile, mainly refers to the geometry of the working surface and the size of the working area, which is designed according to the application of different lithologies. The casing is the matrix of inlaid diamond particles, which is made of certain particle size of cemented carbide powder plus appropriate fusible metal as binder, and pressed sintered surface.

Method of use:

PDC bits work best in soft to medium-hard formations with large homogeneous sections. It is not suitable for drilling gravel layers and soft-hard interlaced formations.

Use low drilling pressure, high speed and large displacement drilling, the bit is used effectively.

Before the drill bit is lowered into the well, the bottom of the well should be cleaned to ensure that there is no metal fallout.

When the drill bit first comes down the well, run and use small drilling pressure and low rotational speed, and resume normal drilling after the bottom of the well is formed.

PDC bits are integral bits without any moving parts, which are suitable for high speed turbo drilling.

There are many pdc bit suppliersin China, but we are one of the best choices for you.

Другие товары поставщика

	TCI Tricone Bit	Under the effect of the WOB and the twist of the drill string, the teeth of the tci tricone bit are crushed and eaten into the rock, and at the sam...
	STEEL TOOTH BIT	The teeth of Steel Tooth Bitare made by milling and processing of tooth wheel blanks, mainly wedge-type teeth, and the structural parameters of the...
	PDC BITS- MAKE MAXIMIZE PERFORMANCE	PDC bit for sale are polycrystalline diamond compact bits. PDC bit are widely used in oil drilling because of their fast drilling speed, long life ...
	SHAPED PDC CUTTER	Wholesale Shaped Cutter PDC Bit (PDC)Polycrystalline diamond composite is a composite material in which thin layers of polycrystalline diamond are...
	PDC DRAG BIT	The PDC Drag Bit consists of four parts: the bit body, the scraper blade, the water divider cap and the nozzle. The drill body is the body of the s...

Похожие товары

	PDC DRAG BIT	Продавец: WUHAN SML TOOLS LIMITED	The PDC drilling drag bit consists of four parts: the bit body, the scraper blade, the water divi...
	PDC CUTTER	Продавец: WUHAN SML TOOLS LIMITED	Artificial PDC cutter is composed of a layer of polycrystalline diamond cutters and carbide matri...
	PDC CORE BIT	Продавец: WUHAN SML TOOLS LIMITED	PDC core bits, also called hollow bits, are a kind of thin tubular multi-tooth bits with carbide ...
	PDC BIT	Продавец: WUHAN SML TOOLS LIMITED	Big blade design: The blades of all PDC drilling series are raised and increased. Using oversized...
	Matrix PDC Drill Bit	Продавец: WUHAN SML TOOLS LIMITED	PDC matrix bit is a kind of cutting bit that weld the diamond composite piece on the drill head b...