Shoelace Wicking Tester

• 

Product Introduction:

Paste the cut sample on the test fixture of the portable MARK-II anti-slip testing machine, put down the weight of the rotating support frame on the test fixture, so that the test piece is pressed on the floor interface by a fixed force, and tilt the rotating support frame of the portable MARK-II anti-slip testing machine, so that the horizontal thrust subjected to the test piece is gradually increased. Until the test piece slides instantaneously. The value of friction coefficient that should be dealt with before the sole test piece slides instantaneously is the large static friction coefficient of the test sole on the floor interface, that is, the anti-slip coefficient.

Reference standard:

ASTM F1677 and other standards

Product Advantages:

Measures Key Safety Property: Quantifies the static coefficient of friction, a critical indicator of pedestrian slip resistance.

Standard Compliant: Designed to meet standards like ASTM F1677. ensuring tests are conducted according to recognized procedures.

Portable Design: Allows for convenient in-situ testing on actual flooring surfaces in various environments.

Provides Quantitative Result: Delivers a numerical value for the anti-slip coefficient.

Relatively Simple Operation: The test principle of applying load and increasing horizontal force until slip is straightforward.

Suitable for Floors and Sole Materials: Can be used to evaluate both flooring surface characteristics and the slip properties of footwear sole materials.

Product Features:

Based on the provided description and typical portable static friction testers:

Test fixture or shoe to hold the test sample.

Weight system to apply a fixed normal load (10 lbs).

Rotating or tilting support frame mechanism to apply and gradually increase horizontal thrust to the test sample.

Sensor or gauge to measure the horizontal force at the point when the sample begins to slide.

Mechanism to calculate the static coefficient of friction from the measured forces.

Designed to be portable for easy transport and use in different locations.

Accommodation for specific sample dimensions (76mm x 76mm).

Requires a stable, horizontal surface for accurate testing.

Technical specifications:

1. Sample size: (76±1)*(76±1)mm.

2. Load: 10IBS.

3. Floor requirements: horizontal floor.

4. Volume: 40*22*39cm.

Другие товары поставщика

	Moisture Permeability Analyzer	The moisture permeability analyzer measures the water vapor permeability by the conditions that a variety of materials are applied. The test condit...
	Shoe Lace and Eyelet Abrasion Tester	Main uses: The shoelace eye wear testing machine is mainly used to test the wear resistance of shoelace and shoe eye under repeated friction. The ...
	Dry microbial penetration tester ISO 22612 YY/T 0506.5	Dry microbial penetration resistance tester DMPRT is to assess the penetration resistance through barrier materials of bacteria-carrying particles....
	Stain resistance tester for architectural coatings	Product Introduction: The interior wall coating in architectural coatings is often polluted by some pollution from daily necessities, people often...
	Wet microbial penetration resistance tester	Standards: YY/T 0506.6-2009 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment-Part...

Похожие товары

	Scott Flex Tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o...
	NEU nanofiber electrospinning device	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil...
	KK03 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK02 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK01 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...