Silicone rubber for cell phone keypad products
PRODUCTION DESCRIPTION:
The product is one kind of transparent, 2-part liquid silicone rubber, catalyzed by platinum, suitable for injection molding processes under high temperature.
KEY FEATURE:
1. Fast curing under high temperature
2. High tensile strength
3. Good rebound property
4. Outstanding resistance to ageing
5. Low shrinkage
6. Low yellowing
7. Excellent thermal and cold stability
APPLICATION:
The series are suitable for making P+R cell keypad etc.
PACKAGING:
It is available in 20kg pails of 200kg drums
TYPICAL PROPERTIES:
Appearance: Transparent
Viscosity(mpa.s): 700000
Shore A hardness: 70~75
Tensile strength(Mpa): 8.0
Tear resistance(KN/m): 20~25
Elongation at break(%): 260~360
Linear shrinkage(%): 0.1
REMARK:
The product should be closed tightly, protected from light and moisture, the shelf life is 12 months.
These figures are for reference only, please contact us for detail.
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
For more information, welcome to contact Lilian:
Phone:
E-mail: lilian(at)
/>Company: XINRUN GROUP LIMITED
Factory address:No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China
Другие товары поставщика
|
|
Foams making silicone rubber,Shockproof & Waterproof Silicone Rubber,Softy Silicone Rubber |
INTRODUCTION OF SILICONE FOAMS:Silicone Foams is a soft, two-component platinum silicone flexible foam that is versatile and easy to use. Vi... |
|
|
Addition Silicone Putty for Dental Molds |
INTRODUCTION:It is a hydrophilic addition silicone rubber impression material, it contains two components, Part A is platinum catalyst, and P... |
|
|
Silicone Rubber Material For Toys,Manual mold making silicone rubber,High Safety Silicone Rubber |
DESCRIPTION OF MANUAL MOLD DESIGN MAKING LIQUID SILICONE RUBBER RAW MATERIALS:This is a kind of room temperature vulcanized silicone rubber ... |
|
|
Silicone rubber material for baby nipples,Softy & Transparent Silicone Rubber |
PRODUCT DESCRIPTION:The series is high transparence and tear strength, 2-part liquid silicone rubber suitable for injection molding processes... |
|
|
Silicone rubber for cell phone keypad products |
PRODUCTION DESCRIPTION:The product is one kind of transparent, 2-part liquid silicone rubber, catalyzed by platinum, suitable for injection molding... |
Все товары поставщика
Похожие товары
|
|
OSi PEMS 57 CAS 70914-12-4 |
Продавец: OSi Holding Limited |
Other descriptions:
Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyethylene... |
|
|
LC12 Two-Component Solvent Free Silicone Conformal Coating |
Продавец: Nanjing Silfluo New Material Co., Ltd. |
Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati... |
|
|
LA-17 Polyether Modified Short Chain Polysiloxane |
Продавец: Nanjing Silfluo New Material Co., Ltd. |
Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has... |
|
|
LA-14 A Modified Trisiloxane and an Silicone Surfactant |
Продавец: Nanjing Silfluo New Material Co., Ltd. |
(It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico... |
|
|
LA-11 A Modified Trisiloxane and an Silicone Surfactant |
Продавец: Nanjing Silfluo New Material Co., Ltd. |
(It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe... |
