New Type Multi-functional finishing agent for chemicals fabric 6603H

• 

Basic Characteristics
Appearance: light yellow irregular solid
Solid content: 98%
Ionic nature: non ionic
pH：5-6
Storage: avoid exposure at room temperature
The multi-functional finishing agent 6603H can be diluted to 20% concentration (yellow thick emulsion), 30%-50% (yellow paste), it is moisture absorption perspiration finishing agent high concentrated products in the market.
Properties And Advantages
Multifunctional finishing agent 6601B molecule containing ester type structure similar to polyester, In the application, one end of the antistatic agent is embedded in the polyester molecule and is firmly combined with the polyester formed eutectic , The polyester fiber is grafted onto the hydrophilic group, and the durability is better, the fabric is endowed with good anti fouling, easy decontamination and hydrophilic property, and the polyester fiber is soft and lubricated to make the fabric more comfortable. Can effectively solve the organic conductive fiber filament defiled, and color fastness to impact on the finished product is small, and can disperse and dissolve the oligomer in high temperature and high pressure bath to reduce the pollution of the oligomer, Improve the fabric color yield, brightness and smoothness, and according to the requirements of the final soft, anti wrinkle mixed with hydrophilic amino silicone oil or amino silicone oil to complete multi-functional finishing effect.
Usage
Solid melted method of 6603H is the same as the traditional moisture absorption perspiration finishing agent, but the melted temperature is lower, less time, when the temperature is 60℃, it takes ten minutes to melt. It only takes two minutes when it is 80℃.
Package And Storage
25Kgs woven bags, storage period of 1 years, keep from moisture.
Environmental protection / toxicity: OeKo-Tex 100.

Другие товары поставщика

	Block Smooth and soft silicone textile finishing M-200	Basic Characteristics Appearance: light yellow transparent liquid Ionicity: weak cation Emulsification: self-emulsification Properties And Advantag...
	Super soft and slippery hydrophilic silicone softening agent used for the continuous processing	Product introduction Waxy silicone emulsion M-200A is emulsified by M200. M-200 is composed of Polymerization of epoxy silicone oil and ammonia eth...
	Hydrophilic softener Siliconer Used for Cotton And Blends MBS9908A	MBS9908A is a quaternary ammonium group, organic silicon block type, and organic silicon linear polymer type water solution. MBS9908A is very suita...
	Smooth block Wax feeling of silicone emulsion A-100	Basic Characteristics Appearance: brown liquid Ionic nature: slight cationic / non ionic Solubility: can be dissolved in water at any ratio (after ...
	Antistantie finishing agent anti-wrinkle 6602F	The multi-functional finishing agent is mixture of polyester, polyether compound and hydrophilic polymer. Applied to polyester fabric finishing, ex...

Похожие товары

	OSi PEMS 57 CAS 70914-12-4	Продавец: OSi Holding Limited	Other descriptions: Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyethylene...
	LC12 Two-Component Solvent Free Silicone Conformal Coating	Продавец: Nanjing Silfluo New Material Co., Ltd.	Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati...
	LA-17 Polyether Modified Short Chain Polysiloxane	Продавец: Nanjing Silfluo New Material Co., Ltd.	Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has...
	LA-14 A Modified Trisiloxane and an Silicone Surfactant	Продавец: Nanjing Silfluo New Material Co., Ltd.	(It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico...
	LA-11 A Modified Trisiloxane and an Silicone Surfactant	Продавец: Nanjing Silfluo New Material Co., Ltd.	(It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe...