POWSIL-59223
POWSIL-59223 is an innovative textile softener, especially designed to deliver a hydrophilic, voluminous and silky natural hand feel to most types of fabrics at lower use level than traditional silicone softeners.
It provides fast & consistent hydrophilicity and high ability of fabric to rapidly absorb & retain liquid water of water absorption to most types of textile fiber or silicone fabric, especially for terry towel, which cannot be obtained with traditional silicone or fatty acid based softeners. It is very stable in ordinary textile finish process without causing oil-spots on fabric.
Technical Data
|
Property |
Value |
|
Physical Form |
Liquid state |
|
Appearance |
Clear, pale & yellowish |
|
Solid Contents (wt%) |
|
|
Viscosity (25°C, cps) |
<1000 |
|
pH (25°C) |
|
|
Flash Point(°C, Open) |
>100 |
|
Diluents |
Water |
|
Gravity(25°C) |
|
|
Ionic |
Slightly cationic |
Application
POWSIL-59223 Hydrophilic Silicone Softenercan be readily diluted with water into any grades wihout additional emulsifying process.
Micro-emulsion for 30.0% of POWSIL-59223
Formulation:
|
POWSIL-59223: |
30% |
|
Water: |
70% |
Procedures:
Charge water into a tank and start to stir;
Add POWSIL-59223 gradually under stirring;
Continue to stir for 5-10 min after all addition;
Clear micro-emulsion will be obtained at end of this procedure.
POWSIL-59223 can be used as received or pre-diluted with water before applying.
Optimum treatments are dependent on the required softness of the fabric and yarn after dyeing and finishing.
Pad-dry-cure process
|
Dosage: |
10~20g/L for light fabric or 25-50g/L for heavy fabric |
|
pH: |
|
|
Ambient temperature |
|
|
Dry/Cure: |
120-170 ºC for1-3min |
Exhaustion process
|
Dosage: |
|
|
Liquor ratio: |
1/10-1/20 |
|
pH: |
|
|
Ambient temperature |
|
|
Time: |
10-30 min |
|
Spinning & Drying: |
100 ~ 170 ºC for 1-3 min |
Garment washing process
|
Dosage: |
|
|
Ambient temperature |
|
|
Time: |
30 ~ 60 min |
|
Spinning & Drying: |
100-130 ºC for 3-5 min |
Stripping:
POWSIL-59223 bySiSiBcan be stripped off fabric. The stripping formulation is as follows:
|
NaOH: |
5g/L |
|
LABS (30%): |
2-5% |
Add water and NaOH onto fabric tank and then heat to 100°C for 60 min. Then rinse fabric with acidic water and water.
Packing and Storage
To ensure that the product quality is maintained, the container should be tightly sealed when not in use. It should be stored at normal room temperature, preventing prolonged exposure to extreme heat and cold conditions, which may cause product separation. POWSIL-59223 tends to be sediment on bottom during storage period. If the product is separated, stir the contents to homogeneous. If the product is frozen, thaw it at warm condition and stir after thawed.
As a silicone producer, we will offer high quality products to you.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Siloxane Powder | As one of the reliable custom silicone manufacturersin China, SiSiBsupplies products like silanes and siliconates, silicone fluids, silicone emulsi... |
 |
RTV-2 Moding Silicone Rubber | SiSiB RTV-2 is a two-part, room-temperature curing silicone rubbers designed for mold-making. SiSiB RTV-2 molding silicone rubber with very soft t... |
 |
SiSiB® PC5424 Ethyl Silicate 40 SiSiB® PC5424 is a hydrolyzed and oligomerized form of ethyl silicate. It is a mixture of monomers, dimers, trimers and cyclic polysiloxanes. SiSiB® PC5424 is a tran | SiSiB® PC5424 EthylSilicate 40 SiSiB® PC5424 is a hydrolyzed and oligomerized form of ethyl silicate. It is a mixture of monomers, dimers... |
 |
SiSiB® PC12010-2 | SiSiB® PC12010-2 is low molecular weight siloxane polymer, colorless, odorless, non-toxic and non-irritating. For the excellent spreading abili... |
 |
Hydroxy Silicone Fluids | Silanol Silicone Oil, Silanol Silicone Fluid, Reactive Hydroxy Silicone, Hydropropyl Silicone Fluid, Hydroxy Silicone Oil SiSiB is a leading manuf... |
Похожие товары
 |
OSi PEMS 57 CAS 70914-12-4 | Продавец: OSi Holding Limited | Other descriptions: Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyethylene... |
 |
LC12 Two-Component Solvent Free Silicone Conformal Coating | Продавец: Nanjing Silfluo New Material Co., Ltd. | Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati... |
 |
LA-17 Polyether Modified Short Chain Polysiloxane | Продавец: Nanjing Silfluo New Material Co., Ltd. | Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has... |
 |
LA-14 A Modified Trisiloxane and an Silicone Surfactant | Продавец: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico... |
 |
LA-11 A Modified Trisiloxane and an Silicone Surfactant | Продавец: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe... |
