Electric Cleaning Agent

• 

Electric Cleaning Agent is mainly used for eradicating dirt, dust, and contaminations on the power equipment surface especially clean those which surface was heavily polluted. After cleaning it can significantly enhance the adhesion between the RTV coatings and the surface of insulator.

The Advantages of Electric Equipment Cleaning Agent

Electric Cleaning Agent Characteristics

Insulator cleaner can quickly remove dust, oil, charcoal and other dirt from insulators and RPV coating insulators without powering down. After cleaning, the insulator can take on a new look and extend the service life of the insulator. In addition, it has no corrosion to the silicone rubber material and has no effect on the hydrophobicity of the insulator, which is the best cleaning and protection product for the insulator.

Electrical cleaning equipmentagent can quickly remove harmful substances such as dust, oil, moisture and carbon powder.

It has a cleaning strength of 35KV, which has special protection for electrical equipment and switching circuits. It can produce antistatic protective film after cleaning.

Non-corrosive for insulators and RTV coating insulators, metals, paint finishes, insulating coatings, plastics, silicone rubber, etc.

The Use Method of Electric Cleaning Agent

Crubbing and brushing method: Use a dry cloth dampened with an insulator electric cleaning agent for scrubbing or brushing. (Note: when it is not charged)

Spraying method: Spraying with a agent for cleaning electrical equipment can quickly remove dust, oil, moisture, carbon powder, metal powder, surface static electricity and other harmful substances on the insulator, and then dry naturally after cleaning.

Cautions of Electrical Equipment CleaningAgent

At the site of cleaning equipment, pay attention to ventilation and ventilation;

Equipment with serious fever, should not be charged clean;

It is strictly forbidden to produce sparks in the workplace;

Particularly humid environment, need to use power outage;

Be careful not to splash into the eyes during use. If accidentally splashed into the eyes, please rinse immediately with water;

Please wear chemical gloves when operation;

Avoid sun exposure when not in use.

Ruisenas one of the mostprofessional silicone coating suppliers, we provide composite polymer insulator, silicone composite insulators, rtv silicone coating and etc. Want to know more? Please contact us.

Другие товары поставщика

	Anti-Algae & Anti-Fouling Coating	Leveraging upon our experience, we have become a prominent Anti-Algae & Anti-Fouling Coatings (RTV-ZB) Manufacturer, Exporter and Supplier in C...
	Insulator & Electric Series	We offer different kinds of Station Post Insulator for Substation, Line Post Insulator, Disc Suspension Insulator,high voltage ceramic insulators， ...
	Silicone Rubber Shield for Porcelain Insulators	Silicone Rubber Shield for Porcelain Insulatorscan used to protect the 10-35kV overhead power line insulators (such as pin porcelain insulator, cap...
	Construction Waterproof Coating	K11 General Type Waterproof Coating In recent years, with the improvement of people's living standard, the living conditions of the requirements i...
	Anti-Algae & Anti-Fouling Coating	Leveraging upon our experience, we have become a prominent Anti-Algae & Anti-Fouling Coatings (RTV-ZB) Manufacturer, Exporter and Supplier in C...

Похожие товары

	LC12 Two-Component Solvent Free Silicone Conformal Coating	Продавец: Nanjing Silfluo New Material Co., Ltd.	Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati...
	LA-17 Polyether Modified Short Chain Polysiloxane	Продавец: Nanjing Silfluo New Material Co., Ltd.	Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has...
	LA-14 A Modified Trisiloxane and an Silicone Surfactant	Продавец: Nanjing Silfluo New Material Co., Ltd.	(It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico...
	LA-11 A Modified Trisiloxane and an Silicone Surfactant	Продавец: Nanjing Silfluo New Material Co., Ltd.	(It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe...
	KSS Potassium Diphenylsulfone Sulfonate	Продавец: Nanjing Silfluo New Material Co., Ltd.	KSS is a high heat stable PC additive. Equivalents to FR2025, EF-42. Description of KSS Potass...