Basecoat powder coating MT-A2204/MT-MW188I
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Description
MT-A2204 basecoat comes in an array of metallic finishes, which offer enhanced exterior durability with the application of a super-durable polyester clearcoat. These advanced systems incorporate proprietary technology to protect and extend the life of these metallics. These MT-A2204 basecoat powders are moisture and stain resistant, chemical and chip resistant durable, and built to last in the most challenging environments.
Powder Properties
| Chemical Type |
Polyester |
| Area of usage | Automotive trim parts,roof rail systems |
| Particle Size Distributon | Custom manufactured |
| Appearance | Smooth, satin |
| Colour | Silver metallic |
| Density (g/cm3) | 1.17 ± 0.05 |
| Stoving schedule | 10 minutes at 200°C (time at object temperature) |
| Application | Electrostatic |
| Storage Stability | under dry, cool (<25°C) conditions, at least 24 months from production date |
Test Conditions
The results are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate | Steel panels, Aluminium |
| Pretreatment | Bonder (WH/60/OC) iron phosphate, Bonder (722/W/OF) |
| Film thickness | 70 µm |
| Cure schedule | 10 minutes 200°C |
Pre-treatment
Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application of MT-A2204 basecoat. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance. Aluminium parts require a chromate conversion pre-treatment.
Application
MT-A2204 basecoat powders can be applied by manual or automatic electrostatic spray equipment. Tribo application is not recommended. It is recommended that for consistent application and appearance product be fluidized during application. MT-MW188I must be fully cured otherwise there may be a loss of metallic effect or discoloration of the clear topcoat. MT-MW188I is not stabilized for direct gas fired ovens.
• All coated pieces should be handled with clean lint free gloves.
• Parts should not be stored in an environment with high humidity.
• Clear coat should be applied as soon as possible after metallic application (maximum time between coats is 8 hours)
• Parts should not be passed through a pre-treatment process prior to application of the clear coat Despite the fact that MT-MW188I is a bonded metallic it is not recommended to recycle the powder.
Types of powder coating
Powder coatings can be categorized by resin system (epoxy, polyester, hybrid, polyurethane), appearance (smooth, texture, hammer, metallic, pearlescent), or performance level (anti-corrosion, heat-resistant, UV-resistant, architectural grade, automotive grade).
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
1,1,4,4,6-Pentamethyl-1,2,3,4-tetrahydronaphthalene CAS No.6683-48-3 | AttributeDetails Chemical Name 1.1.4.4.6-Pentamethyl-1.2.3.4-tetrahydronaphthalene CAS Number 1320-98-9 Synonyms Pentamethy... |
 |
EP hybrid powder coating | Product description It is made of epoxy resin and polyester resin as the main raw materials, and has their own unique properties, so that the prod... |
 |
Powder coating for construction machinery | Introduction Engineering machinery is an important part of the equipment industry. Engineering machinery can be seen in major areas related to nat... |
|
|
High Reflectivity (Infrared Camouflage Cooling) Powder Series | Key Features & Specifications FeatureSpecification / Benefit Reflective Cooling Effect Reflects >90% of solar infrared radiatio... |
 |
Flat high gloss MT-04978592 | Introduction No. MT-049/78592 Color Light grey Surface Flat high gloss System Polyester/049 Scope of application... |
Похожие товары
 |
Powder coatings for automotive interior parts MT-A2201/MT-YN203GF | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2201 powders can be used ... |
 |
Powder coatings for Automotive trim parts MT-A2201/MT-YN218GF / | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2201 powders can be used ... |
 |
Powder coatings for Automotive trim parts MT-A2201 /MT-YZ108GF | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT- A2201 clearcoats can be u... |
 |
Powder coatings for Automotive trim parts MT-A2201/MT-YZ204I | Продавец: Standard International Group (HK) Limited | Product Description MT- A2201 clearcoats can be used for pillars and appliqués, roof rack... |
|
|
Basecoat powder coating MT-A2204/MT-MW188I | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2204 basecoat comes in an... |
