Antimicrobial Powder Coatings
WA：+86 132 6275 2056
WEB: std-coatings.com
Detailed Description
Made of inorganic antibacterial agent, with long-term antibacterial properties, suitable for indoor and outdoorenvironment Properties: – Prevent the breeding of Escherichia coli, aflatoxin, Gambococcus, Penicilliumcitrullus, Bacillus citrullus, trichoderma, dermatophyllus, rhodococcus.
PRODUCT FEATURES
Product performance:
long term Up to 4N- 5N
(99.99-99 .999%)
Application:
kitchen utensils: dishwasher, stove, cupboard, etc
Household appliances: refrigerator, freezer, water dispenser, microwave oven, etc
Medical equipment: medical beds, etc
Spraying method:
high voltage electrostatic sprayin 60-80KV
Recommended film thickness:
60-80 um
Application parameters
Curing time
200°Cx10–15mins
STANDARD TEST METHOD FOR ITEMIZER
In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um,and the, performance index of the film would change slightly with different gloss.
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and otherheavy metals, and meets RoHS requirements .
Storage conditions: dry at about 35°C, stored in the ventilated room, avoid direct sunlight. Under these conditions, thepowder can be stored for 12 months, product can still be used after re- examined to be in good condition even if it is foundto be expired.
Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and donot represent the performance commitment of the product application.
The results vary with environmental factors and other conditions.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Polymeric Isocyanate Desmodur 44V20 | General Properties and Applications Desmodur44V20 is a liquid, dark brown polymeric isocyanate based on diphenylmethane-4.4′-diisocyanate (M... |
 |
Low Cure Powder Coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introductio Most powder coating chemistries required relatively high curing tempera... |
 |
High content metal powder | Metal bonding Has wonderful three-dimensional optical dimensions and tones High metal content, close to paint effect Excellent stability and str... |
 |
Transfer printing powder coatings | Introduction Transfer printing powder coatings are advanced decorative coatings that allow for the application of intricate patterns and designs o... |
 |
(FBE) Single Layer Epoxy Anti-Corrosion Powder Coating | WA：+86 132 6275 2056 WEB: std-coatings.com Product Introduction: This product is carefully formulated using epoxy resin and functional curing ... |
Похожие товары
 |
Metallic flat high gloss MT-049/98010 | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
