STANDARD BUILDING MATERIALS POWDER
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Polyester resin and TGIC curing agent as the main raw materials.
PRODUCT FEATURES
Coating characteristics:
Good adhesion, excellent mechanical properties, tough coating film.
Smooth and smooth film
Good Outdoor endurance
Excellent resistance to excessive baking
Application:
Suitable for various outdoor products such as:outdoor lighting, beach chair, solar water heater,
outdoor air conditioning unit, aluminum curtain wall,door and window frame, ceiling, highway guardrail,fence, sports facilities, communication equipment,etc
Application parameters:
Curing time
200°Cx10–15 mins
Recommended filmthickness:
60-80 um
Spraying method:
high voltage electrostatic sprayin60-80KV
STANDARD TEST METHOD FOR ITEMIZER
In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um,and the performance index of the film would change slightly with different gloss.
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and otherheavy metals, and meets RoHS requirements.
Storage conditions: dry at about 35C, stored in the ventilated room, avoid direct sunlight. Under these conditions, thepowder can be stored for 12 months, product can still be used after re-examined to be in good condition even if it is foundto be expired.
Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and donot represent the performance. commitment of the product application.
The results vary with environmental factors and other conditions.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Polyurethane primer STD-927 | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description The one-component primer can improve the surface condition of the base layer, m... |
 |
Garden powder coating | Characteristics of powder coatings 1. The coating film is flat and smooth; 2. The paint film has good physical and mechanical properties, especia... |
 |
Polyurethane waterproof coating A STD-939 | Product Description The polyurethane prepolymer has a high resin content with excellent ratio of NCO, which can form a highly dense and elastic wa... |
 |
Architectural aluminum powder coating MT-D34 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-D34 is a series of durable powder coatings specially formulated ... |
 |
Insulating Powder Coating | WA：+86 132 6275 2056 WEB: std-coatings.com Introduction Insulating Powder Coatingis engineered to provide high electrical insulation for motor... |
Похожие товары
 |
Metallic flat high gloss MT-049/98010 | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
