.

Gray wrinkle color powder coating

Getaquote

whats/app:+86 132 6275 2056

WEB: std-coatings.com

COLORS AVAILABLE

RAL colors coating powder

Pantone colors

Color-matching regarding customer requirement is available

PHYSICAL PROPERTIES

Specific gravity :1.2 ~1.8g/cm3 up to colors

Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)

Level of liquidity:24 ~27 mm

CURING CONDITIONS

180 °C ~200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE

8-12 square meters /kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6months.Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is anon-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

Mechanical property

Testing items

Standards and methods

Inspecting index

Impact strength

GB/T1732-1993. AS3715 2.8

>50kg/cm

Bending resistance

GB/T1185-88. AS1580 402.1. ISO9227

Pass 2-5 millimeters

Adhesion CHECKED TEST

GB/T9286-88.2mm Cross cut, ISO2409

Pass100/100. passes 0levels

Cupdrawing:Erichsen, ISO1520

Erichsen, ISO1520

Pass 3-7 millimeters

Chemical resistance and weather resistance

Salt spray test

GB/T1771-91.500 hours

The cross section of corrosion less than 2MM

Hot and damp resistance test

GB/T,1000 hours

Without air bubbles, loses the light slightly

Acid resistance

10% CH3COOH, 240 hours

Without air bubbles, the surface without damage

Alkali resistance

10% NaOH, 240 hours

Without air bubbles, the surface without damage

Heat resistance

200degree,1 hour

The color change is lower than E=1.5

Solvent resistance

MEK24 hours soaked in solvent-free

Without air bubbles, the surface without damage

Uvioresistant

QUV-313.500 hours

Gloss higher than 80% lower than the

Munsell color change level

Water tolerance of

2 hours

No bubble, not falling, losing light


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Architectural Powder Coatings – Factory Direct from China
Architectural Powder Coatings – Factory Direct from China Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Our products are available in: Customized Colors: RAL, Pantone, or fully tailored shade...
Powder Coating For Imitation Wood Grain
Powder Coating For Imitation Wood Grain Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction With the improvement of people’s environmental awareness, coating ap...
Flat surface MT-04914662
Flat surface MT-04914662 Introduction No. MT-049/14662 Color Yulong (white) Surface Flat surface System Polyester Scope of application U...
Taro white Powder Coatings MT-70285
Taro white Powder Coatings MT-70285 Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com No. MT-70285 Color Taro white Surface Fine sand texture matte ...
Blue flash silver color powder coating
Blue flash silver color powder coating Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com COLORS AVAILABLE RAL colors coating powder Pantone colors Color-matching regarding cust...
Все товары поставщика

Похожие товары

Metallic flat high gloss  MT-049/98010
Metallic flat high gloss MT-049/98010 Продавец: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co...
Pure epoxy powder coating
Pure epoxy powder coating Продавец: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist...
Epoxy polyester powder coating
Epoxy polyester powder coating Продавец: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc...
Pure polyester weather-resistant powder coating Factory Supplier
Pure polyester weather-resistant powder coating Factory Supplier Продавец: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris...
Metallic flat semi-gloss Powder Coating  MT-049/97003
Metallic flat semi-gloss Powder Coating MT-049/97003 Продавец: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co...