EE pure epoxy powder coating

• 

Getaquote

whats/app：+86 132 6275 2056

WEB: std-coatings.com

Product description

Made with epoxy resin as the main raw material, it has excellent chemical resistance and mechanical properties.

Application areas:

Suitable for coating metal products with high requirements for corrosion resistance, electrical insulation and flexibility. It is generally not recommended to be used directly for surface coating of various outdoor products.

Physical properties:

1. Specific gravity: 1.2-1.8 (depending on color and gloss)

2. Storage: Below 25℃, in a dry environment, it can be stored for 6 months if the packaging is intact.

3. Packaging: 15 kg/box, carton packaging, lined with two layers of polyethylene inner bags.

Coating performance:

Application instructions:

Surface treatment: Treat according to the substrate and required performance

Spraying: electrostatic gun or friction gun

Film thickness: 60-70 um

Curing conditions: Workpiece temperature/time: 140-200℃ x 15 minutes (depending on the specific product)

Health and safety:

This powder coating is a non-toxic product, but dust should be avoided during use. Operators are advised to wear appropriate dust masks and glasses. If possible, try to avoid long-term contact between skin and powder coating.

Safety and Protection

All dust is irritating to the respiratory system, so avoid inhaling dust and steam generated during curing. Take measures to avoid skin contact. If contact is necessary, wash the skin with water and soap. If contact with the eyes, wash immediately with clean water and seek medical attention in time. Avoid the deposition of dust and powder particles on the surface and dead corners. Tiny organic particles will ignite and explode under static electricity. All equipment must be grounded to prevent static electricity.

Другие товары поставщика

	Metal Bond Powder Coatings	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Metal powder coatings refer to various powder coatings containing metal pi...
	Solvent Type Epoxy Resin STD-BE236X80	Introduction： STD-BE236X80 is a bisphenol A solvent based epoxy resin,used with polyamide curing agent to produce high-quality anti-corrosion pain...
	Fluoropolymer MT-9028	MT-9028 polymer processing aid is a free-flowing white powder containing 97% active ingredients. This product is used to improve the processing per...
	Blue series powder coating	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Light blue silver powder coating MT-4116A Silver blue powder coating MT-PMA0002
	Powder coating primer containing zinc MT-PZ ALZ55V	Product Description MT-PZ is a powder coating primer containing zinc which is designed to give enhanced corrosion protection of blasted mild steel...

Похожие товары

	Metallic flat high gloss MT-049/98010	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co...
	Pure epoxy powder coating	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist...
	Epoxy polyester powder coating	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc...
	Pure polyester weather-resistant powder coating Factory Supplier	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris...
	Metallic flat semi-gloss Powder Coating MT-049/97003	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co...