One-component polyurethane moisture curing primer

• 

Getaquote

whats/app：+86 132 6275 2056

WEB: std-coatings.com

Product Description

MT-85B one-component primer is a one-component polyurethane primer. MT-85B one-component primer cures by reacting in moist air to form a tough coating with corrosion and wear resistance. MT-85B one-component primer can thoroughly penetrate porous and water-permeable surfaces and has high adhesion to concrete surfaces. MT-85B one-component primer is one of the ideal primers for polyurea and polyurethane elastomer coatings.

Typical performance

Surface treatment

All surfaces must be clean and dry.

All previous paints, coatings or lacquers on the substrate must be completely removed unless they are strong and tightly adhered.

Packaging and mixing

Supply form: MT-85B one-component primer is a one-component paint, packed in 200-liter barrels, 200 kg per barrel.

Smaller packages (20 liter and 50 liter packages) can also be configured as needed.

From the time of transportation, the storage period is 6 months, and the storage conditions are: storage in a ventilated room at 5-35℃.

Before use, do not open the lid. Open the lid and use it.

Construction

MT-85B single-component primer should be applied by brush or roller. It can also be applied by single-component spraying.

For mortar base surface, it is generally necessaryto apply one coat of MT-85B single-component primer at a coating rate of 0.2-0.25kg/square meter, and then proceed with subsequent construction.

MT-85B single-component primer should be topcoated within 12-48 hours after construction. If the topcoat construction cannot be completed within 48 hours, it is recommended to re-apply MT-85B single-component primer.

After painting, it should not rain within 24 hours. If it rains, it is necessary to check the curing of the coating film and re-apply the primer if necessary.

Restrictions and Warnings

MT-85B one-component primer is susceptible to moisture and must be protected from moisture contamination. Keep sealed. Containers must be sealed with a volatile gas to prevent contamination. After opening, if all components have not been used up, fill with nitrogen or dry gas and seal with wax.

MT-85B one-component primer in the can is flammable. Use only in well-ventilated areas. Avoid heat, fire, flames and fireworks. Use explosion-proof construction equipment. Avoid prolonged or repeated inhalation of vapors or sprays. Applicators should wear approved gas masks. Avoid contact with eyes and skin.

Другие товары поставщика

	Architectural aluminium powder coating MT-D2525 Gloss/ Satin/ Matt	Product Description MT-D2525 Gloss/ Satin/ Matt is a range of durable powder coatings specially formulated without of TGIC for use on architectura...
	Metal bonding powder	Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder accordi...
	Acrylic Clear Powder Coatings	Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clarity and flowing -Stain and chemical resistance -...
	filter element powder	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Accurate selection of powder has always been a problem for the powder ...
	Pure polyester resin powder coating	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com MT-3082 Outdoor dark gray and black wrinkles MT-3081 Outdoor red wrinkles MT...

Похожие товары

	Metallic flat high gloss MT-049/98010	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co...
	Pure epoxy powder coating	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist...
	Epoxy polyester powder coating	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc...
	Pure polyester weather-resistant powder coating Factory Supplier	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris...
	Metallic flat semi-gloss Powder Coating MT-049/97003	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co...