Aluminum wheel hub powder coating
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Product description
Our company’s aluminum wheel hub powder coating is a series of products specially designed for the characteristics of wheel hub bottom layer protection and surface glazing coating. It is a series of products with multiple varieties that are suitable for different requirements and coating characteristics. The product has excellent leveling, strong adhesion and good salt spray resistance.
Product series
Transparent powder
High transparency pure polyester transparent powder
Ordinary transparency pure polyester transparent powder
Base powder
High leveling pure polyester base powder
High leveling epoxy polyester mixed base powder
Application field
Our company’s aluminum wheel hub powder coating is a series of products specially designed for the characteristics of wheel hub bottom layer protection and surface glazing coating. It is a series of products specially designed for different requirements and coating characteristics.
Transportation packaging
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be avoided from direct sunlight, moisture and heat, and contact with chemicals.
Hygiene and safety
Operators should wear dust masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
Powder properties
| Characteristics | The product has excellent leveling, strong adhesion and good salt spray resistance. |
| Specific gravity | 1.2~1.8g/cm’ (depending on the formula and color) |
| Particle size | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, and greater than 100 microns powder <0.5%. |
| Storage stability | Powder coatings for aluminum wheels should be stored in a dry and ventilated room below 35°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used. |
Coating properties
Transparent powder
| Test items | Inspection standard or method | Inspection index |
| Appearance | Visual inspection | Various board surface effects |
| Impact | GB/T 1732 | ≥50Kg·cm |
| Bending | GB/T 6742 | ≤2mm |
| Cupping | GB/T 9753 | ≥6mm |
| Hardness | GB/T 6739 | ≥H |
| Adhesion | GB/T 9286 | Level 0 |
| Neutral salt spray resistance | GB/T 1771 | 800h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality |
Base powder
| Test items | Inspection standard or method | Inspection index |
| Impact | GB/T 1732 | ≥50Kg·cm |
| Bending | GB/T 6742 | ≤2mm |
| Cupping | GB/T 9753 | ≥6mm |
| Hardness | GB/T 6739 | ≥H |
| Adhesion | GB/T 9286 | Level 0 |
| Neutral salt spray resistance | GB/T 1771 | 800h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality |
| Curing conditions | Recommendation: acrylic transparent powder 180℃/10mins, pure polyester transparent powder 200℃/10mins or low temperature curing 180℃10mins, base powder 180℃/10mims. | |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Polyester powder coatings for indoor use MT-300 | Product description MT-300 is a series of polyester resin based thermo-setting powder coatings formulated using TGIC. The pigments used in the MT-... |
 |
Super leveling powder coating | WA：+86 132 6275 2056 WEB: std-coatings.com Introduction The Super leveling powder coating series features an exclusive formula that provides e... |
 |
Anti-Corrosion Powder Coatings for Pipelines | WA：+86 132 6275 2056 WEB: std-coatings.com Product SegmentationApplication Fields Single-Layer Epoxy Powder Coating Buried long-d... |
 |
Powder coatings for Automotive trim parts MT-A2201 /MT-YZ108GF | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT- A2201 clearcoats can be used for pillars and appliqués, roof racks, ... |
 |
Epoxy Anti-Corrosion Powder Coating for Firefighting Pipes | Product Introduction:This product is formulated using linear phenolic epoxy resin, polyurethane-modified epoxy resin, and advanced curing agents, d... |
Похожие товары
 |
Metallic flat high gloss MT-049/98010 | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
