Concentrated Recycling Technology of Formaldehyde

• 

Concentrated Recycling Technology of Formaldehyde

Proprietary Technology and Plants

Technical Features:

In the production of paraformaldehyde and polyoxymethylene, high concentrations of formaldehyde are required as raw materials. But the normal formaldehyde production, whether it is silver or iron molybdenum, the product concentration is not more than 55%. So the need for raw materials for dehydration dehydration enrichment, and enrichment process will produce dilute formaldehyde. Dioformaldehyde is usually used to produce downstream products (such as urotropine, methylal, etc.) that are not required for formaldehyde feedstock concentrations and enrichment and recycling.

Commonly used dilute formaldehyde concentration recovery technology there are two, respectively, decompression flash separation process and pressurized distillation enrichment process. The former in the concentration process will once again produce about 8% of the dilute formaldehyde; the latter can be recovered 36-46% of the formaldehyde solution, but in the pressurized distillation process, with the increase in pressure, formaldehyde prone to disproportionation reaction Formic acid, which will not only cause formaldehyde loss, more importantly, formic acid will seriously corrode the equipment, although this problem can be selected by the higher grade of special steel to solve, but the investment will be too high, very economical.

I company dilute formaldehyde enrichment recovery technology, in the pressurized distillation method on the basis of the process and equipment, such as internal technical improvements, resulting in reduced corrosion, equipment investment reduction, and integrated with the tower and tower Heat load, production and energy consumption greatly reduced.

95 tons / day 22% dilute formaldehyde concentrated recovery as an example.

Другие товары поставщика

	Urea Formaldehyde (UF) Glue Plant	Urea Formaldehyde (UF) Glue Plant Agent Technology and Plants Technology Introduction The Urea Formaldehyde (UF) technology provided by SL...
	Ethyl Acetate Plant and Process Technology	There are 4 main prevailing processes for , i.e. Direct Esterification Process, Acetaldehyde Condensation Process, Ethanol Dehydration Process and...
	PODE Plant	is a kind of oligoether compound which is produced by acetalization reaction. When both ends of poden are blocked by methoxy, it is called polymet...
	Hydrogen Peroxide Production Plant	There are several methods for , among them the AO(auto-oxidation) process is the most prevailing one. In this process, 2-alkyl anthraquinone is mi...
	модификатор ударопрочности ПВХ акриловый	is mainly used to improve the impact properties and processability of PVC. PVC is important among general plastics. It has high strength, low pri...

Похожие товары

	РЕАКТОР С МЕШАЛЬНЫМ ЛОПАСТНЫМ УСТРОЙСТВОМ	Продавец: Jiangsu Sunkaier Industrial Technology Co., Ltd.	РЕАКТОР С МЕШАЛЬНЫМ ЛОПАСТНЫМ УСТРОЙСТВОМ ОПИСАНИЕ Лопастной мешающий реактор типа SK3000E-...
	Intelligent Mechanical Equipment	Продавец: CITIC IC LUOYANG HEAVY MACHINERY CO., LTD	With the development of modern science and technology, industrial arm is a kind of high-tech auto...
	Horizontal Centrifuge Machine	Продавец: CITIC IC LUOYANG HEAVY MACHINERY CO., LTD	TWZ series horizontal vibratory centrifuge belongs to the centrifugal dewatering machine, the ser...
	Wet Grid Ball Mill	Продавец: CITIC IC LUOYANG HEAVY MACHINERY CO., LTD	Wet ball mill is a kind of energy-saving industrial grinding mill which adopts rolling bearings a...
	Vertical Centrifuge	Продавец: CITIC IC LUOYANG HEAVY MACHINERY CO., LTD	The vertical centrifuge machineis made up of the screen which diameter range from 700 to 1,000 mm...