polyester poly （MT670 BAC）

Use:

Binder for coating materials

Relevant identified uses of the substance or mixture and uses advised against

Type of product: Mixture

Mixtures

polyester polyol

ca. 80 % in n-butyl acetate

Information on basic physical and chemical properties

Emergency overview

yellowish, liquid, solvent-like. Flammable liquid and vapour. May cause drowsiness or dizziness

Classification of the substance or mixture

GHS Classification:

Flammable liquids, Category 3 (H226)

Specific target organ toxicity (single exposure), Category 3 (H336) (Narcotic effects)

Mixtures

polyester polyol

ca. 80 % in n-butyl acetate

Hazardous components

n-Butyl acetate

Concentration [wt.-%]: ca. 20

GHS Classification: Flam. Liq. 3 H226 STOT SE 3 H336 (Central nervous system)

Trimethylolpropane

Concentration [wt.-%]: ca. 0.5

GHS Classification: Repr. 2 H361f

Description of first aid measures

General advice: Take off all contaminated clothing immediately.

If inhaled: Take the person into the fresh air and keep him warm, let him rest; if there is difficulty in breathing,

medical advice is required.

In case of skin contact: In case of skin contact wash affected areas thoroughly with soap and plenty of

water. Consult a doctor in the event of a skin reaction.

In case of eye contact: Hold the eyes open and rinse with preferably lukewarm water for a sufficiently long

period of time (at least 10 minutes). Contact an ophthalmologist.

If swallowed: DO NOT induce the patient to vomit, medical advice is required

Precautions for safe handling

Provide sufficient air exchange and/or exhaust in work rooms.

Provided good ventilation and/or local exhaust systems are used, the Workplace Exposure Limit(s) stated in

section 8 should not be exceeded.

Explosion protection required.

The personal protective measures described in section 8 must be observed. The precautions required in the

handling of solvents must be taken. Avoid contact with skin and eyes and the inhalation of vapor.

Keep away from foodstuffs, drinks and tobacco. Wash hands before breaks and at the end of workday. Keep

working clothes separately. Change contaminated or soaked clothing.

Respiratory protection

Respiratory protection required in insufficiently ventilated working areas and during spraying.

Hand protection

Suitable materials for safety gloves; EN 374:

Laminate glove – PE/EVOH/PE; breakthrough time >=480 min.

In the event of contamination, change protective gloves immediately. Recommendation: contaminated gloves

should be disposed of.

Eye protection

Wear eye/face protection.

Skin and body protection

Wear suitable protective clothing.

Другие товары поставщика

	Sealing application adhesive	Introduction Polyurethane and epoxy resin materials, different models of products can provide targeted insulation strength, flame retardant perfor...
	CAS 98327-87-8	BINAP 1.1′-Binaphthyl-2.2′-diphemyl phosphine CAS 98327-87-8 Product Number B2383 Purity / Analysis Method >97.0%(GC) ...
	PTFE powder coating	Product introduction Polytetrafluoroethylene (PTFE), commonly known as “the king of plastics”, is a polymer compound formed by the pol...
	Methylated Urinary Aldehyde Resin	Methylated Urinary Aldehyde Resin: Properties and Applications Table 1: Key Characteristics of Methylated Urinary Aldehyde Resin PropertySpec...
	Diethylene Glycol Monobutyl Ether Acetate CAS 124-17-4	Introduction Ethylene glycol butyl ether acetate is a high boiling point, multifunctional binary alcohol ether ester solvent, which can be used as...

Все товары поставщика

Похожие товары

	Epoxy/Polyester Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ...
	Polyester Clear Powder Coatings	Продавец: Standard International Group (HK) Limited	This series of product are made of polyester resin (as hardener) and highly transparentmaterials....
	Acrylic Clear Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar...
	Polyurethane Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ...
	MDF Powder Coating	Продавец: Standard International Group (HK) Limited	Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are...