Dispersants STD-58685N
Introduction
Composition: Organic copolymer solution with pigment-friendly groups
Appearance: yellow transparent solution
Active ingredient: 50%
Solvent: Mixed dibasic ester/diethyl formamideSuitable for medium and high polarity systems, good match with commonly used coating resins, good versatility in the coating system
Suitable for medium and high polarity systems, good match with commonly used coating resins, good versatility in the coating system
Dispersants STD-58685N: Technical Profile
| Category | Specifications |
|---|---|
| Product Name | Dispersant STD-58685N |
| Chemical Type | Modified polycarboxylate copolymer |
| Appearance | Clear to slightly hazy viscous liquid |
| Active Content | 45±2% |
| pH Value | 6.5-8.5 (10% aqueous solution) |
| Density (25°C) | 1.08-1.12 g/cm³ |
| Viscosity (25°C) | 300-800 cps |
| Solubility | Fully soluble in water, compatible with glycol ethers |
Key Characteristics
| Property | Performance Features |
|---|---|
| Dispersion Mechanism | Electrosteric stabilization for superior particle separation |
| Thermal Stability | Maintains effectiveness up to 250°C |
| pH Stability | Performs across pH 4-12 |
| Ionic Character | Anionic with nonionic side chains |
| Foam Generation | Ultra-low foaming characteristics |
Primary Applications
| Industry | Performance Benefits |
|---|---|
| Automotive Coatings | Excellent color development in basecoats |
| Industrial Paints | Reduces viscosity in high-solid systems |
| Construction | Improves workability of cementitious systems |
| Paper Coatings | Enhances opacity and brightness |
| Ceramic Processing | Prevents particle settling in slurries |
Technical Advantages
| Advantage | Operational Benefit |
|---|---|
| Universal Compatibility | Works with organic/inorganic pigments |
| Dosage Efficiency | Effective at 0.3-2.0% loading |
| Process Improvement | Reduces milling time by 30-40% |
| Environmental Profile | APEO-free, meets EU Ecolabel criteria |
| Storage Stability | Prevents hard settling in formulations |
Recommended Usage
| Parameter | Guideline |
|---|---|
| Optimal Addition | During pigment pre-mix phase |
| Temperature Range | 10-80°C for incorporation |
| Mixing | High shear recommended |
| Shelf Life | 18 months in original packaging |
| Storage | Keep at 5-30°C, avoid freezing |
Safety & Compliance
| Aspect | Certification Status |
|---|---|
| Toxicology | Non-hazardous per GHS |
| Skin Irritation | Mild (Category 3) |
| Ecotoxicity | Readily biodegradable (>60% in 28 days) |
| Regulatory | REACH registered, TSCA compliant |
| Handling | Standard chemical PPE required |
Performance Comparison
| Test Parameter | STD-58685N | Standard Dispersants |
|---|---|---|
| Dispersion Fineness | <5μm Hegman | Typically 10-15μm |
| Viscosity Reduction | 40-60% improvement | 20-30% improvement |
| Color Strength | 95-100% development | 80-90% development |
| Storage Stability | 6+ months | 3-4 months |
References
Product Technical Data Sheet (Rev. 2024Q2)
European Coatings Journal– “Advanced Dispersant Technology” (2023)
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
PTFE powder coating | Product introduction Polytetrafluoroethylene (PTFE), commonly known as “the king of plastics”, is a polymer compound formed by the pol... |
 |
MS modified silane sealant | Introduction Modified silane sealant, environmentally friendly, has a wide range of adhesive properties, no need for primer, UV protection, no sol... |
 |
A7750 CAS 3081-14-9 | 3081-14-9 –Names and Identifiers Name N,N’-BIS(1,4-DIMETHYLPENTYL)-P-PHENYLENEDIAMINE Synonyms 77PDUnilink 7100Vulkanox 4... |
 |
Methylated Urinary Aldehyde Resin | Methylated Urinary Aldehyde Resin: Properties and Applications Table 1: Key Characteristics of Methylated Urinary Aldehyde Resin PropertySpec... |
 |
Rheology modifier STD-9010 | Introduction Composition: Polyamide wax dispersion Appearance: light yellow paste Active ingredient: 20% Solvent: Mixed aromatic hydrocarbons ... |
Похожие товары
 |
Epoxy/Polyester Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Продавец: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
