Acrylic polyol resin MT-7152-80
Introduction
Characterization
Acrylic polyol resin designed for high solid low VOC ACE top coating
Form supplied
Form supplied is approximately 80% in butyl acetate
Applications
Suitable for 2K PU coatings providing outdoor durability, high solid and low VOC.
Property: Hydroxylvalue, on solid
Value: 83
Unit of measurement :mg KOH/g
Method :TM-2432
Solubility / thinnability
can be thinned with aromatics, esters and ketones solvent.
Storage
The resin should be stored indoors in original, unopened and undamaged container in a dry place at storage temperature between 5- 30 °C. Exposure to direct sunlight should be avoided.
Storage time
Covestro represents that, for a period of 6 months (180 days) following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values set forth in section “specifications or characteristic data” above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under section “storage” above and is otherwise handled appropriately. The lapse of the 6 months (180 days) period does not necessarily mean that the product no longer meets specifications or the set values. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications or the set values. Covestro does not make any representation regarding the product after the lapse of the 6 months (180 days) period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications or the set values after the lapse of the 6 months (180 days) period.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Coating for Busbar by Electrostatic Spray Application | Product Description MT-EL-HLF59R is a one part, 100 % solids, epoxy powder coating for insulation of wire and busbars. Designed for electrostatic ... |
 |
CAS 2421-28-5 | CAS 2421-28-5 Purity / Analysis Method >96.0%(T) Molecular Formula / Molecular Weight C17H6O7= 322.23 Physical State (20 deg.... |
 |
Rheology modifier STD-9010 | Composition: Polyurea mixture solution Appearance: yellow transparent solution Active ingredient: 50% Solvent: N-methylpyrrolidoneScope of Appli... |
 |
Adhesion promoters STD-7266 | Composition: Special polyester copolymer Appearance: light yellow viscous liquid Active ingredient: 60% Solvent: Mixed dibasic estersApplication... |
 |
Silicone fluid（MT6000 ） | Introduction PRODUCT DESCRIPTION MT6000 is a silicone fluid based on straight chained polydimethylsiloxane fluid. APPLICATIONS • Therm... |
Похожие товары
 |
Epoxy/Polyester Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Продавец: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
