ASTM D5321 Geosynthetic Interface Shear Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Specification
For direct shear test, adopt detachable drive unit, which can be moved from one shear box to another, allowing the testing of one sample while another sample is being prepared in a separate box.
For pullout test, the box is removable of a constant rate controlled by the servo motor; it is as same as moving box in direct shear test.
The direct shear test machine consists of servo motor, load cell, control panel, transducer, readouts for the sensors, etc.
The drive system is mounted on a wheeled frame to allow for easy separation from the sample box.
The box has low friction linear bearings when moving.
Digital readout for each test and can be connected to PC for data analysis.
Application
The geosynthetic materials direct shear and pull-out friction testing system is primarily used to test the pull-out friction resistance between geosynthetic materials (such as geotextiles, geomembranes, geogrids, etc.) and the surrounding soil, as well as the friction characteristics of these materials under direct shear conditions.
Material performance evaluation: It tests the friction and pull-out performance of geosynthetic materials under specific conditions to evaluate their stability and durability in practical applications.
Engineering material selection: It allows for the comparison of the friction and pull-out performance of different geosynthetic materials to select the most suitable material for engineering needs.
New material development: In the development of new geosynthetic materials, this system can serve as an important tool for performance evaluation, helping researchers optimize material formulations and processes.
Standard
Direct shear test:
IS0 12957.1:Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test
GB/T 17635.1-1998:Geotextiles and geotextile-related products - Determination of friction characteristics - Part 1: Direct shear test
JTG E50 T1129:Test method for direct shear friction of geosynthetics in highway engineering (corresponding to JTG E50 T1129)
SL/T 235:Specification for test and measurement of geosynthetics
ASTMD 5321:Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method
Pull test :
JTG E50 T1130:Test method for pull-out resistance of geosynthetics in highway engineering (corresponding to JTG E50 T1130)
Parameters
| Description | Details |
|---|---|
| Shear box sizes | 300 x 300 x 200mm; 600 x 600 x 300mm; 600 x 600 x 300mm Under the shear box: 300 x 300 x 200mm; 800 x 600 x 300mm; 800 x 600 x 300mm |
| Drawing box sizes | 300 x 300 x 340mm; 600 x 400 x 500mm; 600 x 400 x 500mm |
| Loading mode | Servo cylinder loading; Hydraulic loading; Hydraulic loading |
| Normal pressure | 0 - 250kPa; 50 - 300kPa (customizable) |
| Static load | 50 - 400kPa |
| Dynamic load | 50 - 300kPa |
| Horizontal drive mode | Servo cylinder; Servo motor; Hydraulic drive |
| Maximum horizontal force | 30kN; 50kN; 100kN |
| Horizontal load accuracy | 0.50% |
| Straight shear drawing speed | 0.1 - 10mm/min; 0.1 - 10mm/min; 0.3 - 10mm/min |
| Direct shear displacement | 0 - 100mm |
| Drawing displacement | 0 - 150mm |
| Displacement resolution | 0.01mm |
| Return speed | 1 - 50mm/min |
| Power supply | AC220V 50Hz |
| Overall dimensions | 2400 * 700 * 2000mm; 2900 * 850 * 3400mm; 1500 * 900 * 1800mm |
Accessoriess
Shear box
Vertical loading device
Horizontal loading device
Tensile and compressive force sensor
Displacement sensor, etc.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
leather crack resistance tester at low temperature | Applications Leather Low-Temperature Flexing Tester is used to evaluate the cold resistance and flexing durability of leather and leather-coated m... |
 |
Alcohol abrasion tester | The Alcohol Abrasion Tester is designed for evaluating the wear and friction resistance of coatings, prints, and surfaces under controlled laborato... |
 |
Motor Accessories Combustion Chamber,FMVSS 302; ISO 3795; ASTM D5132-04 | Introduction: This machine is designed according to ISO3795 standards and relevant clauses. Apply to identify vehicles (cars, multipurpose passeng... |
 |
Vacuum leak tester | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bottles, freeze-dried powder injection bottles, and pr... |
 |
Metal Corrosivity Tester | standards GB/T 15970 ISO 7539 ASTM G31 GB/T 10125 Scope of Application The metal corrosivity tester is designed and manufactured in line with... |
Похожие товары
|
|
ASTM D5321 Geosynthetic Interface Shear Tester | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Specification For direct shear test, ado... |
 |
JW-F Series Motorized Industrial Videoscope | Продавец: Shenzhen Joinwe Smart Co.,Ltd | The Motorized Industrial Endoscopeis an advanced visual inspection tool engineered for high-preci... |
 |
Fireplace | Продавец: XIAMEN HC WORLD STONE IMPORT&EXPORT CO.,LTD. | Product Attributes: Material:Crafted from premium natural stone—including marble, granit... |
 |
Bydi Экономичный эскалатор | Продавец: ООО Bydi лифт | Профессиональный производитель эскалаторовДелаем ODM и OEM для клиентовСвяжитесь со мной для полу... |
 |
Bydi Пассажирский лифт | Продавец: ООО Bydi лифт | Профессиональный производитель подъемников в Сучжоу, Китай мы можем изготовить подъемники ODM ил... |
