ERW Pipe Galvanized
ERW Carbon Steel Pipe (electric resistance welding) is produced by welding strip of flat sheet metals.
That are formed, bent and prepared for welding. After that, making galvanization treatment to help prevent corrosion, rust, thereby extending the pipe life.
Welded Steel Pipe is available in A53, BS1387 and API 5L specification. Welded carbons steel is the most cost effective solution for a high quality pipe with pressure integrity test.
ERW Pipe Galvanized Dimensions
|
Carbon Steel A53 GR.B Pipe Composition |
|||||
|
Manufacturer and supplier of ASTM A53 Steel Pipes in Type E/ F and Type S |
|||||
|
Type S (seamless) |
Type E (electric-resistance welded) |
Type F (furnace- welded pipe) |
|||
|
Grade A |
Grade B |
Grade A |
Grade B |
Grade A |
|
|
Carbon max. % |
|||||
|
Manganese % |
|||||
|
Phosphorous, max. % |
|||||
|
Sulfur, max. % |
|||||
|
Copper, max.% |
|||||
|
Nickel, max. % |
|||||
|
Chromium, max. % |
|||||
|
Molybdenum, max. % |
|||||
|
Vanadium, max. % |
|||||
ERW Pipe Galvanized Mechanical & Physical Properties
|
ASTM A53 Gr.b Carbon Steel Pipe Mechanical & Physical Properties |
|||
|
A53 Mechanical Properties |
|||
|
Grade A |
Grade B |
Grade C |
|
|
Tenside strength, min, psi (MPa) |
48000(330) |
60000(415) |
|
|
Yield strength, min, psi (MPa) |
30000(205) |
35000(240) |
|
|
Tensile Requirements |
|||
|
Seamless and Electric-resistance-welded (ERW) |
Continuous-Welded |
||
|
Grade A |
Grade B |
||
|
Tensile Strength, min., psi |
48,000 |
60,000 |
45,000 |
|
Yield Strength, min., psi |
30,000 |
35,000 |
25,000 |
ERW Pipe Galvanized FAQs
What Is The Difference Between LSAW Pipe And ERW Pipe?
The LSAW pipe diameter range is larger than ERW, normally from 16 inch to 60 inch, 406mm to 1500mm. Good performances on high pressure resistance, and low-temperature corrosion resistance same as well.
As an erw pipe manufacturerand erw pipe supplier, we can offer kinds of related products for sale, if you have needs, please leave us a message.
If you want to know more types of flanged gate valves, please visit our website.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
LSAW Pipes | LSAW Pipe(Longitudinal Submerged Arc-Welding Pipe), DSAW pipe (Double Submerged Arc Welded Steel Pipe), Both of them are made of Steel raw material... |
 |
Hebei Longsheng | Hebei Longsheng |
 |
ASTM Flange | ASTM Flange The American Association for Materials and Testing, known in English as the American Society for Testing and Materials, it is one of t... |
 |
Flanges | Flanges for saleare a part used for connections between the ends of tubes or used at the entrance and exit of equipment for connections between two... |
 |
ZHMWS-A1 WCB Body Check Valves Flanged End | Cast Steel Swing wcb check valve bonnet bolts, univalve swing, is the international swing check valve structure. Steel flanged check valves functio... |
Похожие товары
 |
API 5CT L80 1CR/3CR/9CR/13CR NUE/EUE copper plated coupling | Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |
 |
L80 3CR/9CR/13CR 3-1/2 NUE/EUE 4FT Pup Joint | Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... |
 |
Pup Joint 2-7/8"NUE N80 2FT Blast Joint | Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... |
 |
NC50 PIN 4145H XT39 BOX Crossover | Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD | 1. ВведениеПерекресток представляет собой трубу или корпус для соединения двух различных размеров... |
 |
API 5CT 2-7/8"NUE N80 Tubing Coupling | Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD | 1. Введение Соединительные резьбы NUE представляют собой короткие длины трубы, используемой для ... |
