OXYGEN LANCE MANIPULATOR
The carbon-oxygen lance mainly refers to the EAF smelting, generally referring to the carbon-oxygen lance at the EAF furnace door, as well as the furnace wall carbon-oxygen burners also called KT lance. The EAF electric arc furnace door carbon-oxygen lance manipulatoris equipped with two water-cooled nozzles, some with two water-cooled oxygen lances, and some with combination oxygen lances.
The former consists of two oxygen lances arranged around, one is a Laval supersonic oxygen lance and the other is a carbon lance used for direct hole carbon powder spraying; The latter is equipped with two spray lances arranged above and below the overall lance, with a supersonic oxygen lance below, which is also a Laval nozzle, and a carbon lance above.
ADVANTAGES
OXYGEN LANCE MANIPULATORADVANTAGES
During smelting, the spray lance inside the furnace door gradually inserts into the furnace as the scrap steel melts. Compared with traditional smelting processes, the use of EAF carbon oxygen lance has the following advantages:
The furnace door carbon oxygen lance injects oxygen into the molten pool at Mach 2 supersonic speed, which changes the Chemical equilibrium in the molten pool and greatly increases the amount of CO in the molten pool.
The whole process of foam slag smelting, due to the participation of carbon injection, the conditions for the whole process of foam slag smelting are improved, the splash is reduced, the power utilization rate is increased, the noise is reduced, and the quality is improved;
As the temperature of the flue gas increases, sufficient oxygen reacts with carbon. Compared with traditional systems, free oxygen is used for CO combustion during decarbonization, resulting in a weaker oxidizing atmosphere in the furnace, reducing electrode and refractory consumption.
WHY
WHY SUCH LANCE MANIPULATOR SYSTEM IS NEEDED?
Carbon removal.
Promotion reduction reaction.
Slag forming.
Horizontal stirring of liquid bath.
Remote control.
Optimal height (up and down) adjustment for different process stages.
Increase of oxygen efficiency and productivity.
Increase of chemical reaction to speed up liquid melting down.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
STEEL ROLLING MACHINE | STEEL ROLLING MACHINE Rolling mill is the equipment used to achieve the metal rolling process, which generally refers to the furnace auxiliary equ... |
 |
EAF ROOF | In the past, the EAF (electric arc furnace) roof mostly used plate type fully water-cooled furnace covers, masonry furnace covers, or plate type se... |
 |
LADLE PRE-HEATER | vertical ladle preheaterare suitable for different types of gas or liquid fuels. Such as blast furnace gas, mixed gas, natural gas, propane, acetyl... |
 |
WATER COOLED CABLE | WATER COOLED CABLE Large cross-section water cooled power cablesare used for the connection between the busbar system and the EAF arm, transmittin... |
 |
TOP CHARGING ELECTRIC ARC FURNACE | TOP CHARGING ELECTRIC ARC FURNACE Top EAF chargingis convention type, from 0.5t to 200t, each capacity requires a bucket charge from the top. The ... |
Похожие товары
 |
WATER-COOLED PANELS | Продавец: CHNZBTECH Co.,Ltd. | WATER-COOLED PANELS CHNZBTECH, a professional water cooled panelssupplier, is committed to getti... |
|
|
WATER COOLED CABLE | Продавец: CHNZBTECH Co.,Ltd. | WATER COOLED CABLE Large cross-section water cooled power cablesare used for the connection betw... |
 |
VOD VACUUM OXYGEN DECARBURIZATION | Продавец: CHNZBTECH Co.,Ltd. | VOD VACUUM OXYGEN DECARBURIZATIONVD/VOD Furnace The equipment structure of a VOD furnaceis bas... |
|
|
TOP CHARGING ELECTRIC ARC FURNACE | Продавец: CHNZBTECH Co.,Ltd. | TOP CHARGING ELECTRIC ARC FURNACE Top EAF chargingis convention type, from 0.5t to 200t, each ca... |
 |
Submerged ARC Furnace | Продавец: CHNZBTECH Co.,Ltd. | The saf submerged arc furnace(SAF) is a specialized heating system utilized to produce a range of... |
