EN10210-1 S235JRH/S275J0H hollow section steel pipe
Hot finished structgural hollow sections of non-alloy and fine grain steels. Main steel tube grade: S235JRH, S275J0H, S355J0H, S355J2H, S355K2H. Size range: 1/2"-36". Tolerance: OD (±1%--max.: 0.5mm , min.:10mm ),wall thickness: -10%
Другие товары поставщика
|
NACE MR0175/ISO 15156 Steel pipe |
This standard applies to all components of equipment exposed to sour environments, where failure by SSC or SCC would (1) prevent the equipment from... |
|
ASME SA-106, ASME SA-192M, ASME SA-209M, ASME SA210M, ASME SA213M Boiler tube |
Boiler tube is used for manufacturing wall panel, economizer, reheater and steam pipeline of boiler. The standard are DIN17175, GB3087, GB5310,ASME... |
|
Acoustic Pipe used for Pile foundation |
Acoutic pipes are used for piling foundation for the test of the length. One end is closed and the other end is covers with cap. All the acoustic p... |
|
45Mn2 pump pipe/tube, carbon steel pump pipe/ tube |
The pump tube usually has two kinds of materials, low-alloy and carbon steel. There are usually three size: DN125, DN150 and DN80, but also can off... |
|
ASTM A106 GR.C SMLS STEEL PIPE |
ASTM A106 seamless steel pipes are used for conveyance of oil, gas and other fluid. The yield strength is ≥240Mpa and tensile strength is ≥41... |
Все товары поставщика
Похожие товары