CCS Flat Bar
Copper-clad Flat Steel
The most superior performance of copper-clad flat steel is the increased grounding surface area, which has improved the electrical conductivity of the horizontal grounding body, thus saving grounding materials.
CCS Flat Bar-6 Meter Production Process
Copper-clad flat steel is produced by electroplating process, which realizes the high combination of copper and steel, that is, the 99.99% electrolytic copper molecule is uniformly plated on the surface of the steel core.
CCS Flat Bar-6 Meter Corrosion Resistance
The copper-clad flat steel has excellent anti-corrosion performance. Since the surface of the steel core is uniformly covered by copper and the copper layer is thick, it can be produced according to customers' requirements with the service life more than 20 years.
CCS Flat Bar-6 Meter Better Conductivity
The most superior performance of copper-clad flat steel as the grounding wire is due to the large grounding area of the copper-plated flat steel. Therefore, it has better electrical conductivity and its own resistance is much lower than that of conventional materials.
CCS Flat Bar-6 Meter Wider Range of Application
Copper-clad copperweld flat steel can be used as lightning strip, up lead or down lead, and horizontal grounding wire, which is suitable for soil conditions with different humidity, temperature and PH.
Safe and fast installation
During the construction of copper-clad copperweld flat steel, it is recommended to use hot-melt flux produced by beisuda company to connect, because the permanent joint connection is more firm and the installation is convenient, which has greatly improved the construction efficiency.
Cost Reduction
Because of its relatively wide characteristics, copper-clad copperweld flat steel is used as grounding conductor and since its grounding contact area is large, the conductivity has been effectively enhanced, thus greatly reducing the cost of grounding compared with the traditional pure copper material.
CCS Flat Bar-6 Meter Specification Details
FAQ
What are the copper bonded products?
what is the copper bonded products？
How to Prepare High Conductivity Copper
How deep should a grounding rod be I
Grounding Device and Grounding Electrode Conductor
How deep should a grounding rod be II
What is the purpose of a grounding rod II
Copper-plated Grounding Rod and Grounding Copper Rod
Contact us to buy copperweld bar, copper clad welding rodnow.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Ground Module | BEST Grounding Module Performance and characteristics of BEST grounding module: The low-resistance grounding module is a non-metallic material-base... |
 |
Exothermic Welding Flux | Exothermic welding Powder Specification and Model Product name Model No Weight Note Exothermic welding Powder BSD-EW-F15 15g Ex... |
 |
What is the copperweld ground rod/ copper bonded earth rod? | Product Name: Copper coated copperweld steel ground rod Production process: electroplating / continuous electroforming Raw materials: Cold draw hig... |
 |
Exothermic Welding | Exothermic welding, also called hot melt welding, fire-clay welding, thermite welding and explosion welding, is a high-heat principle that utilizes... |
 |
COPPER-CLAD STEEL GROUNDING CONDUCTORS | copper clad ground wireis a new material developed by Ningbo Zhenhai Beisuda Petrochemical Equipment Co.,Ltd. to replace pure copper. Copper-clad c... |
Похожие товары
 |
API 5CT L80 1CR/3CR/9CR/13CR NUE/EUE copper plated coupling | Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |
 |
L80 3CR/9CR/13CR 3-1/2 NUE/EUE 4FT Pup Joint | Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... |
 |
Pup Joint 2-7/8"NUE N80 2FT Blast Joint | Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... |
 |
NC50 PIN 4145H XT39 BOX Crossover | Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD | 1. ВведениеПерекресток представляет собой трубу или корпус для соединения двух различных размеров... |
 |
API 5CT 2-7/8"NUE N80 Tubing Coupling | Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD | 1. Введение Соединительные резьбы NUE представляют собой короткие длины трубы, используемой для ... |
