Discontinuous PU sandwich panel
The product line is consisted of the press and the rail stands. Two worktables are to move into the press and the other two stay on rail stands. Initially, put the top and the bottom facing sheets inside of mould frames and then do the necessary sealing work. After that, feed the worktables into the press. When worktables inside the press moves out orderly, the other two feed in at the same time. Upon the finish of feeding, the press will close and slant at a angle, waiting for the injection PU raw materials from the PU mixing head into different panels. Meanwhile materials start foaming and curing. At this time, mould frames on worktables moved out can be opened and the finished products can be unloaded to get ready for next production cycle.
Advantages of Discontinuous PU Sandwich Panel:
- Panels are produced faster than conventional ones: demoulding times are 30-35% shorter.
- The average distribution foam - at equal overall density - is better than in conventional panels.
- Scrap parts - and all relevant disposal or repairing costs - are virtually eliminated nice and clean quality panels are supplied, with very high mechanical properties and state-of-the-art insulation efficiency.
Technical Datas of Discontinuous PU Sandwich Panel:
|
Raw material |
Color coated steel coil or Aluminum sheet |
|
Coil thickness |
|
|
Coil width |
1060-12500mm |
|
Line speed |
|
|
Core density |
About 40(Kg/m2) |
|
Panel length |
1~12mm |
|
Panel width |
1,000mm |
|
Panel thickness |
40~150mm |
|
Foam system |
PU or PIR rigid foam |
|
Foam density |
approx 35~45 kg/m3 |
|
Inner height or building |
6m |
|
Thermal conductivity |
|
|
Tensile strength |
300–500 (KP a) |
|
Water vapor transmission |
|
|
Bending strength |
550–560 (KP a) |
|
Stable operating temperature |
-40to+50(°c) |
|
Required man power PU line |
4-6 workers |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Normal Temperature Elastomer Polyether Injection Machine | Technical Parameters of Normal-Temperature Type Elastomer Polyether Injection Machine: Mixing Ratio Material A: Material B =100:90 ... |
 |
Adhesive Lamination Machine | Introduction:The adhesive lamination machine serves to compound two coiling materials by gluing adhesive, usually for the compounding between fab... |
 |
Rotary Cutting Machine | Operation principle of rotary cutting machine:Cylindrical polyfoam after being pierced on its center is penetrated on the loading roller of the m... |
 |
Vertical Flexible Polyfoam Cutting Machine | Introduction of vertical flexible polyfoam cutting machine:The vertical flexible polyfoam cutting machine is a kind of indispensable equipment fo... |
 |
Two Components Low Pressure PU Form Injection Machine | Constituents of PU Form Injection Equipment:Our PU form injection machine is consisted of mixing head, loading tanks, metering pump unit, hot-wat... |
Похожие товары
 |
Полностью автоматическая открывалка GT-ACT29 | Продавец: Чжаосин-гуретт технолоджис лимитед | Автоматический трубонарезной станок используется для автоматического резки труб, применяемых в на... |
 |
Anti-corrosion SSAW Steel Pipe | Продавец: HEBEI TIRICO PIPELINE CO.,LTD | Anti-corrosion SSAW Steel Pipe Anti-corrosion steel pipes are used in petroleum, chemical, gas, ... |
 |
1435 мм цифровой колеи с Bluetooth использование на железной дороге | Продавец: Whohan interорбитальное оборудование LTD — высокотехнологичная компания | Цифровая железнодорожная колея используется главным образом для измерения ширины железнодорожной ... |
 |
NE-1525 Featuring Automatic Reset Battery Hydraulic Pipe Plumbing Tool | Продавец: Zhejiang Huaqi Information Technology Co., LTD | ● The automatic reset battery hydraulic pipe crimping tool is an industry- solution designed for ... |
 |
DC series high efficiency european jaw crusher | Продавец: Shanghai Dongmeng Road and Bridge Machinery Co., Ltd. | Jaw crusher is widely used in ore crushing, construction aggregate production, construction waste... |
