220 KV XLPE Insulated Power Cable
220 KV XLPE Insulated Power Cable
Standard
We produced according to National Standard of GB/Z18890.2-2002 of the People’s Republic of China.
Range of application
It is suitable forsingle-core Power cable’s installation and operation under normal conditions of rated voltage 127/220KV, but it is not suitable for cable in special use, such as submarine cable.
Characteristics of cable
Rated voltage of cable is U0=127KV、U=220KV、Um=252KV.
The allowable maximum temperature of cable conductor is 90℃whenit runs in normal , and 250℃ when it short circuited (Longest time is 5s).
The minimum bending radius of cable installation is recommended to 20 times of outer diameter of cable.
Service environment (Place)
Lead sheath cable, is suitable for environment with more serious corrosion but no much nitric acid ,acetic acid and organic matter ( Such as mud, coal and strong alkaline corrosion matter with technical force, pulling force ,stress and vibration etc.)
Aluminium sheath cable, is suitable for environment with minor corrosion and required to bear a certain mechanical force (For example , connected with transformer directly and laying at bridge opening or in shaft etc.)
Metal plastic compound sheath cable is suitable for general damp and warm place , no corrosion or light corrosion and no direct contact with water and bear not so much technical fore , pulling force, stress and vibration.
PVC outer sheath cable is mainly used in cable line with general fire-proof requirement and insulation requirement for outer sheath.
PE outer sheath cableis mainly suitable for directly buried laying cable line with higher requirement on outer sheath insulation , low temperature environment under 20℃, or soaked place by chemical liquid and low toxicity requirement when cable burns, when PE outer sheath is used in tunnel or shaft , fire-control and flame0retardant measures should be adopted if necessary .
Representation method of product
JLW02-127/220KV-1×630 GB/Z18890.2-2002
- Single-core copper conductorwith rated voltage of 127/220 KV, nominal sectional area of 630mm2, so XLPE sheath insulated corrugated aluminium sheath PVC sheath power cable will be represented as : YJLW02-127/220 KV -1×630 GB/Z18890.2-2002.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
PVC Insulated Fixedly Laid Cable(Wire) | PVC Insulated Fixedly Laid Cable(Wire) Product Standard GB/T 5023-2008, equivalent to IEC 60227 Our PVC InsulatedFixedly Laid Cableis suitable for ... |
 |
Five-Core PVC Insulated Power Cable | Five-Core PVC Insulated Power Cable Product Standard Enterprise standard is used together with GB12706-2008. Usage PVC Sheathed Power Cableis suita... |
 |
PVC Sheathed Power Cable | Silane XLPE Insulated Power Cable Product Standard Enterprise standard: Equivalent to GB/T 12706-2008 and IEC 502-2004. Usage This product is suita... |
 |
Combustion-Retardant Cable&Wire Serial Products | Combustion-Retardant Cable&Wire Serial Products Product Standard Enterprise standard. At the same time ,apart from implementing IEC 332 for com... |
 |
Single Core Power Cable | 110 KV XLPE Insulated Power Cable Standard We produced according to National Standard of GB/T11017.2-2002 of the People’s Republic of China. ... |
