engine winch,Cable Drum Winch,Powered Winch
(1) the ground should be put on the flat, accessibility, and fixed tightly, prevent the ground plane to move or skewed.
(2) run one end of the rope to lower by grinding core pulling, and suction clockwise around the core grinding, the other end by the upper half of the grinding core leads.
(3) ran to the derivation of the rope should be guide pulley, may not directly lead to high.
Другие товары поставщика
|
|
fiberglass push pull rod for NBN telcom fish tape |
The outside layer is smooth and firm ABS resin. It is widely used for the cables works or cleaning in cable pipe or channels. It has the advantages... |
|
|
JT-300 integral mechanical crimping pliers |
Manual type crimping pliers:Using high and low two levels of plunger pump driven design, operation fast and effort; System is equipped with safety ... |
|
|
THC-45 Safety electric hydraulic cable cutter |
THC-45 Safety hydraulic wire rope cutter 1.Flip top cutting head rotates 350degree 2.Two stage hydraulic to reduce cutting cycle automatic release ... |
|
|
EZ-45 power cable cutter |
1. The lightest battery hydraulic cutter in this field. 2. To be operated with singal hand at optional direction. 3. It's applicable for operation ... |
|
|
T50 fish type kit |
1.Black spring and red glue to the above 2.Wire rope twists the figure 8 3.Wire wear into the figure 8, spring lock wire 4.Wire put into red rubber... |
Все товары поставщика
Похожие товары