new type Powered Winches,Cable Winch
The use of ground grinding security technology
(1) the ground should be put on the flat, accessibility, and fixed tightly, prevent the ground plane to move or skewed.
(2) run one end of the rope to lower by grinding core pulling, and suction clockwise around the core grinding, the other end by the upper half of the
grinding core leads.
(3) ran to the derivation of the rope should be guide pulley, may not directly lead to high.
(4) discover the rope phenomenon, immediately stop, manage their ropes rear can continue to promote ground grinding work.
(5) ground on the ground should be equipped with prevent grind core reverse braking mechanism, prevent the core grinding reverse cuts.
(6) ground when stop running, brake should be good, and will run the rope and pull on the rope on the lock, the operator can leave.
(7) many operation shall have a clear division of responsibilities, personal command, the same action, it is forbidden to irrelevant personnel stay in run on
either side of the rope and pulled tight rope.
Другие товары поставщика
|
|
electric cable puller |
The Reel Rod has a sturdy, powder coated, steel tube frame and features a 16" diameter storage basket. Up to 400 ft. of rod can be stored in this b... |
|
|
SKG-7 bolt type wire rope clips |
Application: apply for anti-twist rope
Rated Load(KN)
Wire rope Diameter(mm)
Weight(Kg)
SKG-50N
50
11-15
7
SKG-70N
70
16... |
|
|
SKL-5 Aluminum cable steel reinforced grip |
Application used to hold the conductor or adjust radian measure while setting up lines Versatility—All models are rated for a variety of wir... |
|
|
DP011-5 cable drum jacks |
DP011-3: Rated Load-3T, apply for drum dia 700-2100mm, application of disc width-below 1500mm, shaft diameter-60mm, weight-75kg DP011-5: Rated Loa... |
|
|
Solid Durable Fiberglass Push Pull |
There are meter marks on the protect layer of duct rodder, which can be used for measuring distance. Marks are printed by professional printing mac... |
Все товары поставщика
Похожие товары
