cable winch shaft drive transission
The use of ground grinding security technology
(1) the ground should be put on the flat, accessibility, and fixed tightly, prevent the ground plane to move or skewed.
(2) run one end of the rope to lower by grinding core pulling, and suction clockwise around the core grinding, the other end by the upper half of the grinding core leads.
(3) ran to the derivation of the rope should be guide pulley, may not directly lead to high.
(4) discover the rope phenomenon, immediately stop, manage their ropes rear can continue to promote ground grinding work.
(5) ground on the ground should be equipped with prevent grind core reverse braking mechanism, prevent the core grinding reverse cuts.
(6) ground when stop running, brake should be good, and will run the rope and pull on the rope on the lock, the operator can leave.
(7) many operation shall have a clear division of responsibilities, personal command, the same action, it is forbidden to irrelevant personnel stay in run on either side of the rope and pulled tight rope.
Другие товары поставщика
|
Customized frp push pull rodder |
Constructed of fiberglass reinforced in the center and consists of a rugged plastic layer that would ensure the lifetime of the flexible rod. Assem... |
|
conduit rod |
The Reel Rod has a sturdy, powder coated, steel tube frame and features a 16" diameter storage basket. Up to 400 ft. of rod can be stored in this b... |
|
SKDD-2 wire grip |
Model
Suitable conductor(GJ)
Rated Load(KN)
(mm)
Weight(kg)
SK-05A
SKDD-1
25-50
10
11
SK-05B
SDKK-2
70-120
20
... |
|
Cable Drum Jacks |
Application: applied in the supporting of reel when laying guiding cable during line construction.Rack jacks suitable for cable tray support, durab... |
|
direct selling movable rodder |
Fiberglass duct rodder features 1.Light weight,durable,resistance to acid,alkali,aging resistant,corrosion resistant. 2.High tensile strength and b... |
Все товары поставщика
Похожие товары