lifting tool, cable winch, cable grinder

• 

The use of ground grinding security technology
(1) the ground should be put on the flat, accessibility, and fixed tightly, prevent the ground plane to move or skewed.
(2) run one end of the rope to lower by grinding core pulling, and suction clockwise around the core grinding, the other end by the upper half of the grinding core leads.
(3) ran to the derivation of the rope should be guide pulley, may not directly lead to high.
(4) discover the rope phenomenon, immediately stop, manage their ropes rear can continue to promote ground grinding work.
(5) ground on the ground should be equipped with prevent grind core reverse braking mechanism, prevent the core grinding reverse cuts.
(6) ground when stop running, brake should be good, and will run the rope and pull on the rope on the lock, the operator can leave.
(7) many operation shall have a clear division of responsibilities, personal command, the same action, it is forbidden to irrelevant personnel stay in run on either side of the rope and pulled tight rope.

Другие товары поставщика

	Cable pulling equipment straight cable rollers for cable installation	The cable roller can protect the cable, at the same time, cable block also can effectively reduce the friction of the cable, improve the constructi...
	steel Straight Line	Detailed Description Used in the cable changing the direction place protection cable not to wear. Features Divides into according to the material...
	LOPG-1/2/3 cable grip	Application used to hold the conductor or adjust radian measure while setting up lines Easy to Use• Versatility—All models are rated for...
	SKL Cable grip,Wire grip,Aluminum alloy wire grip	This aluminum alloy conductor gripper serves to adjust the sag and tighten the overhead line conductors. It is forged from high strength aluminum a...
	Electric supplies cable jack,Cable drum jacks,Plate cable stand	DP028-2: rated load 2T, thickness of bottom plate-6mm, dia of bottom plate-800mm, weight- 50kg DP028-3: rated load 3T, thickness of bottom plate-...

Похожие товары

	BMR4612001/001	Продавец: 双为（香港）科技有限公司	Атрибуты продукта Атрибут Значение Выберите атрибут Производитель: Flex Категория продукта: Неизо...
	R-785.0-0.5	Продавец: 双为（香港）科技有限公司	Неизолированные преобразователи постоянного тока 0,5 А постоянного тока REG 6,5-34 В 5 В Атр...
	OKL-T3-W12P-C	Продавец: 双为（香港）科技有限公司	Производитель: Murata Категория продукта: Неизолированные DC/DC-преобразователи RoHS: Стиль мон...
	NMV0515SAC	Продавец: 双为（香港）科技有限公司	Производитель: Murata Категория продукта: Изолированный DC-DC преобразователь (тип «сквозно...
	NKE0505DC	Продавец: 双为（香港）科技有限公司	Изолированный DC-DC преобразователь (сквозной) 1 Вт 5-5 В DIP SINGLE DC/DC Производитель: Murata...