BZ-65C/85C/105C Battery Powered Cable Cutter for Al/Cu cable
1.a double piston pumpwhich is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.
2.which returns the piston into its starting position when the maximum operation pressure is reached.
3.allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston& die when the button is pressed.
4.around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
5.do neither have a memory effect nor self-discharge.Even after long periods ofnon operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
6.If a deviation from the set operation pressure or low battery charges is identified,an acoustic signal.
Другие товары поставщика
|
|
Hydraulic cable wire cutter head |
Cable cutting head 1.Product Description: CPC-85B cable cutting head Features: 1.Flip top cutting head rotates 350 degree centigrade. 2.Two stage h... |
|
|
eco duct rodder provider |
Fiberglass duct rodder features 1.Light weight,durable,resistance to acid,alkali,aging resistant,corrosion resistant. 2.High tensile strength and b... |
|
|
Triple Corner Roller |
1.Application: Used for guiding cable to turn and set free. and used for setting power cable and communication cable in trenchers or on ground. 2.... |
|
|
EXPEZ-400 electric hydraulic clamp from China |
parameter specification: Product model: EZ - 400 plug-in crimping pliers Output: 120 kn Scope: pressure was 16-400 Stroke: 38 mm Pressure welding n... |
|
|
HZ-45 Hydraulic cable cutter |
Specifications Cutting range:DIA.45mm Cu/Alu cable and Amoured Cu/Alu cable Two stage hydraulic to reduce cutting cycle,autimatic release pressure ... |
Все товары поставщика
Похожие товары
