EN10216 Alloy Pipes

for pressure purposes

· EN 10216-1 Non-alloy steel tubes with specified room temperature properties

· EN 10216-2 Non alloy and alloy steel tubes with specified elevated temperature properties

· EN 10216-3 Alloy fine grain steel tubes

· EN 10216-4 Non-alloy and alloy steel tubes with specified low temperature properties

· EN 10216-5 Stainless steel tubes

DIN EN 10216-1

Seamless steel tubes for pressure purposes–Technical delivery conditions-Part 1: Non-alloy steel tubes with specified room temperature properties

Specifies the technical delivery conditions for two qualities, T1 and T2, of seamless tubes of circular cross section, with specified room temperature properties, made of non-alloy quality steel…

DIN EN 10216-2

Seamless steel tubes for pressure purposes–Technical delivery conditions – Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2002+A2:2007

The document specifies the technical delivery conditions in two test categories for seamless tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel.

DIN EN 10216-3

Seamless steel tubes for pressure purposes-Technical delivery conditions – Part 3: Alloy fine grain steel tubes

Specifies the technical delivery conditions in two categories for seamless tubes of circular cross section, made of weldable alloy fine grain steel

DIN EN 10216-4

Seamless steel tubes for pressure purposes –Technical delivery conditions -Part 4: Non-alloy and alloy steel tubes with specified low temperature properties

Specifies the technical delivery conditionsin two categories for seamless tubes of circular crossection, made with specified low temperature properties, made of non-alloy and alloy steel…

DIN EN 10216-5

Seamless steel tubes for pressure purposes–Technical delivery conditions-Part 5: Stainless steel tubes; German version EN 10216-5:2004, Corrigendum to DIN EN 10216-5:2004-11; German version EN 10216-5:2004/AC:2008

This Part of this European Standard specifies the technical delivery conditions in two test categories for seamless tubes of circular cross-section made of austenitic (including creep resisting steels) and austenitic-ferritic stainless steel which are applied for pressure and corrosion resisting purposes at room temperature, at low temperatures or at elevated temperatures. It is important that the purchaser, at the time of enquiry and order, takes in account the requirements of the relevant national legal regulations for the intended application.

Read more:

DIN:Deutsche Industrie Normen (=German Industry Standard)

Size (mm) we can supply:

Hot-rolled: O.D.: 51-508; W.T.:7∼60; L: max 16000

Cold-drawn: O.D.: 10-50; W.T.:2∼10; L: max 16000

Hot-expanded：O.D.: 325-1020; W.T.:6∼50; L: max 12000 and other specifications in accordance with customer requirements.

Packing:

Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection

Inspection and Test:

Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test.

Surface Treatment:

Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested.

Ordering Information

Orders for material under this specification should include the following, as required, to describe the desired material

Другие товары поставщика

	AISI 4140 Steel Pipe	AISI 4140 is a chromium molybdenum alloy steel specification widely used in the oil and gas industry. Similar to grade AISI 4130 but with a slight...
	Alloy Round Bars	Specifications · Grade: Alloy steel · Standard: AISI, ASTM, BS, DIN, GB, JIS · OD：10-500mm · Thickness: Max:800mm &midd...
	ASTM A519 Alloy Pipes	Specification: ASTM A519- specification covers for several grades of carbon and alloy steel mechanical tubing, either hot-finished or cold-finishe...
	ASTM/AISI Standard Alloy Round Bar	Specifications · Grade: · Standard: AISI, ASTM, BS, DIN, GB, JIS · OD：10-500mm · Thickness: Max:800mm · Width:...
	Round Bar AISI 4140 Steel Pipe	AISI 4140 is a chromium molybdenum specification widely used in the oil and gas industry. Similar to grade AISI 4130 but with a slightly higher ca...

Все товары поставщика

Похожие товары

	Injection Tape in Hair Extensions	Продавец: Weihai Full Shine International Co.Ltd	Full Shine's injection tape hair extensionsare meticulously crafted from 100% virgin hair, offeri...
	Wire Hair Extensions	Продавец: Weihai Full Shine International Co.Ltd	Welcome to the universe of Full Shine, where we champion individuality by encouraging everyone to...
	Virgin Hair	Продавец: Weihai Full Shine International Co.Ltd	Full Shine® offers a premium quality virgin haircollection, sourced from superior human hair ...
	Wire Hair Extensions	Продавец: Weihai Full Shine International Co.Ltd	Welcome to the universe of Full Shine, where we champion individuality by encouraging everyone to...
	Weft Hair Extensions	Продавец: Weihai Full Shine International Co.Ltd	Full Shine weft hair extensions, crafted from 100% human hair and backed by professional certific...