Traceable Rodders Copper cable in rod

• 

TRACEABLE DUCT RODDER containing metal lines, can be used to detect equipment easily detect the direction of the pipeline, as well as the location of the TRACEABLE DUCT RODDER .

We can generate the TRACEABLE DUCT RODDER has two kinds, one is to be able to carry the monitoring function, one kind is the individual tracking function. The difference between the two is that with a probe into the function of a video wire inside, and a power cable, you can head the head to install the head, in order to view the situation in the pipeline. A bare copper wire can be used to locate and track the position of the TRACEABLE DUCT RODDER in a single probe function.

The traceable duct rodders are available in 8mm-16mm diameter. Detectable duct rods are used to find, follow and accuratelymap the duct route without digging or trenching. The traceable duct rod is used in conjunction with both a signal transmitter and a receiver. The easily identifiable signal is transmitted along the entire length of the duct rod.

The traceable duct rod has an 18 AWG copper wire, almost twice the size of the competition, in the center of the fiberglass core. The copper wire is also connected to the end fittings so the transmitter leads canmake a direct connection to the copper wire. The female end fitting provides the attachment point for the transmitter's lead connection. The other transmitter lead is connected to a stake driven into the earth. The direct connection of the signal to the copper wire provides themost effectivemethod of signal transmission.

Roddiameter:φ6mm,φ8mm,φ9mm,φ10mm,φ11mm,φ12mm,φ13mm,φ14mm,φ15mm,φ16mm.Rod length:80m,100m,120m,150m,200m,250m,300m,350m,400m,500m.

Rod selectIon

Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including:

The size of ducting it is to be pushed through

The distance the rod is to be pushed

The number and tightness of bends in the ducting

If the ducting is already occupied by cable

When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals.

Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod may cause increased friction in the tighter bends.

Другие товары поставщика

	Traceable Rodders Copper cable in rod	TRACEABLE DUCT RODDER containing metal lines, can be used to detect equipment easily detect the direction of the pipeline, as well as the location ...
	5mm,6mm,8mm,9mm,10mm Duct Rodder Multiple diameter	Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to ...
	Duct Rodder at a large discount	Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to ...
	Tuf Rodder Diameter 5mm to 15mm	Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to ...
	5mm,6mm,8mm,9mm,10mm Duct Rodder Multiple diameter	Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to ...

Похожие товары

	2be3500 Liquid Ring Vacuum Pump/Circulation Pump	Продавец: Greentech International (Zhangqiu) Co., Ltd	2BE3500 Liquid Ring Vacuum PumpThe application range and characteristics:2BE3 series liquid ring ...
	C300-1.5A Multistage Centrifugal Blower/Oil Free	Продавец: Greentech Industry (Jinan) Co., Ltd	The profile curve of rotor is advanced, As a result, the effciency of blower is up to 80%. Integ...
	2rb 590-7ab26 Side Channel Blower/Low Noisy Packing Machines	Продавец: Greentech Industry (Jinan) Co., Ltd	The impellers in the G_series machines are mounted directly on the motor shaft for noncontact com...
	2rb 530-7AV35 Regenerative Blower/Air Compressor/Side Channel Blower	Продавец: Greentech Industry (Jinan) Co., Ltd	The impellers in the G_series machines are mounted directly on the motor shaft for noncontact com...
	M8026 Roots Blower/Air Blower for Industrial and Transport Oxygen Supply	Продавец: Greentech Industry (Jinan) Co., Ltd	Greentech International (Zhangqiu) Co., Ltdis the professional roots blower supplier. Series M Ro...