Edge Plating/Half-hole PCB

• 
• 
• 

Half hole pcb

The walls of the PTH holes on the PCB are plated with Half-hole formed by smooth and complete metal forming.The Half hole process on the edge of the board is already a mature process in PCBSKY PCB manufacturing processing.

How to control the quality of the product after forming the Half-hole on the edge of the board. For example, the copper spurs of the hole wall and the residue have always been a problem in the processing.

This type of board has a row of half hole in the PCB, which is characterized by a relatively small aperture, mostly used on the carrier board, as a daughter board of the motherboard, through the half-hole and the motherboard and components The feet are welded together.

Therefore, if there are copper thorns remaining in these half-hole, the soldering of the plug-in manufacturers will result in inaccurate solder joints and weak soldering, which will cause a bridge short circuit between the two pins.

Half hole pcbhas a minimum processing capacity of 0.4 mm for the sample and a minimum of 0.5 mm for the batch.

pcb edge platingdoes not have a set definition per IPC. However, the industry generally accepts this as being copper plating that continues from the top and bottom surfaces and along one or more perimeter edges. The pcb edge plating processcan be used for a variety of purposes, including, but not limited to edge soldering, edge connections, and to increase current carrying capacity. Burrs Often edge plating, especially on castellations, can result in burrs from the final machining process.

We apply a modified, proprietary process flow that results in the burrs being polished down to the edge of the feature. Copper Peeling Plating over a large substrate surface can lead to the plated copper peeling due to a lack of adhesion strength. We address this by first roughening the surface through a combination of chemical and other proprietary means. We then use direct metallization, which has a higher copper bond strength, to prepare the surface for plating.

Welcome to custom Edge Plating PCB / Half Hole PCB directly from PCB Factory at low cost.And welcome to custom pcb fabricationfrom PCB MANUFACTURER CHINA.

Другие товары поставщика

	Flexible PCB	Custom flex pcb chinafrom PCBSKY, pcb manufacturer in china shenzhen, a TRUE PCB MANUFACTURER. Because of the advantages (for example, cost, space,...
	Edge Plating/Half-hole PCB	Half hole pcb The walls of the PTH holes on the PCB are plated with Half-hole formed by smooth and complete metal forming.The Half hole process on ...
	Gold Fingers PCB	Among the large-scale use of PCI and optical modules and cable sockets, the goldfingers PCBhas been divided into: long and short gold fingers, brok...
	Gold Fingers PCB	Gold Fingers PCB Gold Fingers PCB High Tg PCB HIGH TG PCBThick / Heavy Copper PCB THICK / HEAVY COPPER PCB Among the large-scale use of PCI and opt...
	High Frequency PCB	Custom high frequency pcbfrom professional PCB manufacturer china Shenzhen with factory price in low cost. The high frequency of electronic equipm...

Похожие товары

	Side Channel Blower (2RB210 ring blower)	Продавец: Greentech Industry (Jinan) Co., Ltd	Greentech International (Zhangqiu) Co., Ltd is the professional side channel blower supplier.The ...
	Lz037b40 Maglev Turbo Blower/Energy Saving	Продавец: Greentech Industry (Jinan) Co., Ltd	The impeller of magnetic suspension centrifugal fan is driven by direct connection between AL7075...
	Volvo Clutch Parts	Продавец: Shaanxi Bowen Hongyun Trading Co. Ltd	Volvo Clutch Parts When it comes to maintaining the performance and reliability of your Volv...
	Lz200 Air Suspension Centrifugal Blower/Suspensioncentrifugal Blower	Продавец: Greentech International (Zhangqiu) Co., Ltd	Performance characteristics:1. High efficiency and energy savingMore than 30% power saving than t...
	Side Channel Blower (4RB ring blower)	Продавец: Greentech International (Zhangqiu) Co., Ltd	Greentech International (Zhangqiu) Co., Ltd is the professional side channel blower supplier.The ...