Hard Gold PCB
Hard Gold PCB, immersion gold pcb, is to immerse the board in the plating tank and apply current to form a nickel-gold coating on the copper foil surface of the board. The electro-nickel gold is characterized by high hardness, wear resistance and oxidation resistance. Widely used in applications.
Introduction to Hard Gold PCBTechnology:
What is Immersion Gold Plating:
Everyone chooses immersion gold plating, then what is immersion PCB gold plated circuit board, we say the whole plate gold plating, generally refers to "electroplating gold", "electroplated nickel gold plate", "electrolytic gold", "electric gold", "electric nickel plate", soft gold and the distinction between hard gold (usually hard gold is used for gold fingers), the principle is to dissolve nickel and gold (commonly known as gold salt) in chemical potion, dipping the board in the plating tank and turning on the current on the PCB. A nickel-gold plating layer is formed on the surface of the copper foil, and the nickel-gold alloy is widely used in electronic products because of its high hardness, wear resistance, and oxidation resistance.
Electric gold standard: nickel thickness 3-5um; gold thickness 0.25-1.5um; gold thickness minimum 3U''.
The Application of Hard Gold PCB
Hard Gold PCB is widely used in intelligent AI, entertainment, educational robots or other industrial intelligent equipment to expand and contract, rich in change action, frequent separation and contact of local ports of the device, which requires good wear resistance of the PCB at the contact area of the port. Sexual and not easily oxidized.
Welcome to custom Hard Gold Plating PCB directly from Shenzhen PCB Manufacturer at low cost.And welcome to custom pcb fabricationfrom PCB MANUFACTURER CHINA.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Edge Plating/Half-hole PCB | Edge Plating/Half-hole PCB Hard Gold PCB HARD GOLD PCBVia in Pad VIA IN PAD PCB FABRICATION Conventional PCB Impedance Control PCB Gold Fingers PCB... |
 |
Gold Fingers PCB | Gold Fingers PCB Gold Fingers PCB High Tg PCB HIGH TG PCBThick / Heavy Copper PCB THICK / HEAVY COPPER PCB Among the large-scale use of PCI and opt... |
 |
Double Sided Flexible PCB | After the double-sided PI board copper-clad board material is used in the double-sided circuit, a protective film is added on both sides to form a ... |
 |
Edge Plating/Half-hole PCB | Half hole pcb The walls of the PTH holes on the PCB are plated with Half-hole formed by smooth and complete metal forming.The Half hole process on ... |
 |
Electric Power | HDI PCBs, one of the fastest growing technologies in PCBs, are now available at PCBSky. HDI PCBs contain blind and/or buried vias and often contain... |
