GGD1 Low-voltage Fixed Switchgear

• 

GCK Low-voltage Withdrawable Switchgear

OverviewThe GCK series switchgear consists of a power distribution center (PC) cabinet and a motor control center (MCC) cabinet. Applicable to power users such as power plants, substations, industrial and mining enterprises, etc. as a power distribution system with 50 Hz AC, maximum working voltage to 660V, and maximum working current to 3150A, as power conversion for power distribution, motor control and lighting. For distribution control purposes. The product has high breaking capacity, good dynamic thermal stability, advanced and reasonable structure, practical and practical electrical scheme, strong series and versatility, and any combination of various scheme units. The cabinets contain more circuits and save land. The area, the appearance is beautiful, the protection level is high, the safety is reliable, and the maintenance is convenient.Product StandardsThe product complies with IEC60439 standard, and also meets the national standard GB7251-87 "Low-voltage switchgear" and ZBK36001-89 "Low-voltage withdrawable switchgear" standard.Product model and its meaning

The main technical parameters

Structural featuresThe basic cabinets of GCK and GCL are assembled and assembled. All the structural parts of the cabinets are galvanized and spray-coated. They are connected to each other by screw fastening to form a basic cabinet frame. Then, as required, doors, baffles and partitions are added. The drawers, mounting brackets, and busbars and electrical components are assembled into a complete control center cabinet. The cabinet structure has the following features.Cabinet

The frame is made of special-shaped steel, which is positioned by gussets and bolted with no welded structure.

Structural characteristics

To ensure the normal operation of the line. Effectively prevent the fault from expanding. When the electrical components are pulled out of the cabinet, the charged body in the cabinet is not exposed. For the user, the use is safer and more reliable. For the feeder cabinet. The cabinet is 600mm wide. Up to 9 or 18 feed circuits can be installed. (18 feeder circuits are only suitable for load units with capacities below 63A)

■ shape and installation size

■Normal use of environmental conditionsThe altitude should not exceed 2000m. The ambient air temperature is not higher than +409C, and the average temperature is not higher than +35 °C within 24h, and the ambient air temperature is not lower than -5 °C. Atmospheric conditions: air is clean, relative humidity does not exceed 50% at +40 °C, and higher relative humidity is allowed at lower temperatures. For example, 90% at +20 °C, no fire, explosion hazard, serious A place where pollution, chemical corrosion and severe vibrations occur. It is inclined no more than 5° from the vertical plane. The control center is adapted to the following temperature transport and storage processes, -25 ° C - +55 ° C, in a short time (not more than 24 h) does not exceed +70 ° C. If the above conditions of use cannot be met, the user shall submit it to our company at the time of ordering and resolve it by negotiation. The installation of the GCK series switchgear is not vertically installed on the wall, and the rear is the outlet cable trench of the cabinet. For maintenance, the rear wall is usually 1000-1200mm.

Другие товары поставщика

	GGJ Intelligent Low Voltage Reactive Power Compensation Device	GGJ Intelligent Low Voltage Reactive Power Compensation Device OverviewThe GGJ series intelligent low-voltage reactive power compensation device i...
	KYN28A-12 Armored Central AC Metal-enclosed Switchgear	KYN28A-12 Armored Central AC Metal-enclosed Switchgear KYN28A-12 armored central AC metal-enclosed switchgear (hereinafter referred to as switchge...
	GGD1 Low-voltage Fixed Switchgear	XMR Distribution Box Overview The XMR series distribution box is a power distribution unit that is designed and assembled into various control func...
	GGD1 Low-voltage Fixed Switchgear	KYN61-40.5 Armored Central AC Metal-enclosed Switchgear ■OverviewKYN61-40.5(Z) type armored removable AC metal-enclosed switchgear (hereinafter ref...
	GGD1 Low-voltage Fixed Switchgear	GCSLow-voltage Withdrawable Switchgear OverviewGCS type low-voltage withdrawable switchgear (hereinafter referred to as the device) is designed and...

Похожие товары

	ST01 One-key DFU Box для iPhone X-16 Pro Max Режим восстановления	Продавец: ШЭНЬЧЖЭНЬСКАЯ ТЕХНОЛОГИЯ PHONEFIX, LTD (КИТАЙСКИЙ PHONEFIX)	Описание AWESHINE One-key DFU Box - ST01, один щелчок для быстрого входа/выхода из DFU и режима в...
	Бесщеточные ножницы для обрезки литиевой батареи беспроводные 20-PS30	Продавец: Nuevo Oriente Machinery & Electronic Co.,Ltd	Полный ассортимент бесщеточных систем 16 В и 20 В обеспечивает регулируемую скорость и безопасную...
	TBK 918 2 in 1 Phone Screen Cutting Grinding Refurbishing Machine	Продавец: Phonefix	TBK-918 Smart Cutting Grinding Machine for Phone Flat/Curved Screen IC Grinder Back Cover Glass P...
	SPD for AC Power Supply	Продавец: Shenzhen Techwin Lightning Technologies Co., Ltd	SPD for AC Power Supply is mainly applicable to the power distribution systems for Class I / II /...
	32WH DC PORTABLE SOLAR GENERATOR	Продавец: Suzhou Cosuper Energy Technology Co., Ltd	The Cosuper 4V8000mAh portable solar generator is a environmentally friendly, easy-to-carry, flex...