HDI PCB

HDI PCBs, one of the fastest growing technologies in PCBs, are now available at PCBSky. HDI PCBs contain blind and/or buried vias and often contain microvias of .006 or less in diameter. They have a higher circuitry density than traditional circuit boards.

There are 6 different types of HDI PCBs, through vias from surface to surface, with buried vias and through vias, two or more HDI layer with through vias, passive substrate with no electrical connection, coreless construction using layer pairs and alternate constructions of coreless constructions using layer pairs.

HDI any-layer printed circuit boards are the next technological enhancement of HDI microvia printed circuit boards: all the electrical connections between the individual layers consist of laser-drilled microvias. The main advantage of this technology is that all the layers can be freely interconnected. To produce these circuit boards, PCBSky uses laser-drilled microvias electroplated with copper.

Special Technologies Used with HDI Any-layer Printed Circuit Boards

Edge plating for shielding and ground connection

Minimum track width and spacing in mass production around 40μm

Stacked microvias (plated copper or filled with conductive paste)

Cavities, countersunk holes or depth milling

Solder resist in black, blue, green, etc.

Low-halogen material in standard and high Tg range

Low-DK Material for Mobile Devices

All recognised printed circuit board industry surfaces available

HDI PCB Technology Sheet

PCBSky HDI PCB Structures

PCBSky HDI PCB Capabilities: Microvias PCB

A microvia maintains a laser drilled diameter of typically 0.006" (150µm), 0.005" (125µm), or 0.004" (100µm), which are optically aligned and require a pad diameter typically 0.012" (300µm), 0.010" (250µm), or 0.008" (200µm), allowing additional routing density. Microvias can be via-in-pad, offset, staggered or stacked, non-conductive filled and copper plated over the top or solid copper filled or plated. Microvias add value when routing out of fine pitch BGAs such as 0.8 mm pitch devices and below.

Additionally, microvias add value when routing out of a 0.5 mm pitch device where staggered microvias can be used, however, routing micro-BGAs such as 0.4 mm, 0.3 mm, or 0.25 mm pitch device, requires the use of Stacked MicroVias using an inverted pyramid routing technique.

Any PCB Layer HDI

4/8 mil laser via capture pad size

Material Options

High temperature FR4

Halogen - Free

Welcome to order HDI PCB from HDI PCB factoryat very competitve factory hdi pcb price.

Другие товары поставщика

	Flexible PCB	Custom flexible PCB board from PCBSKY,flex pcb chinaShenzhen, a RELIABLE PCB MANUFACTURER. Because of the advantages (for example, cost, space, an...
	Double Sided Flexible PCB	After the double-sided PI board copper-clad board material is used in the double-sided circuit, a protective film is added on both sides to form a ...
	HDI PCB	HDI PCBs, one of the fastest growing technologies in PCBs, are now available at PCBSky. HDI PCBs contain blind and/or buried vias and often contain...
	HDI PCB	HDI PCBs, one of the fastest growing technologies in PCBs, are now available at PCBSky. HDI PCBs contain blind and/or buried vias and often contain...
	Hard Gold PCB	Hard Gold PCB Hard Gold PCB High Tg PCB HIGH TG PCBVia in Pad VIA IN PAD Hard gold plating pcb, immersion gold PCB, is to immerse the board in the ...

Все товары поставщика

Похожие товары

	KW1-M1300-00X yamaha CL 8x2 0402 feeder	Продавец: ZK Electronic Technology Co., Limited	KM-05 MUFFLER SKM-05 MUFFLER KV8-M71Y9-00X BODY CYLINDER YAMAHA YV100X KM1-M7104-00X YV100II PI...
	16-КАНАЛЬНЫЙ ЦИФРОВОЙ ВЫХОД УДАЛЕННЫЙ МОНИТОРИНГ И УПРАВЛЕНИЕ ПЛК РАСШИРЕНИЕ МОДУЛЬ ETHERNET IO	Продавец: она Нженбе iLai Technology Co.,Ltd.	Комбинированный ввод-вывод BL190 Modbus TCP обеспечивает 26 вариантов плат ввода-вывода, включая ...
	Machine Bolt	Продавец: HEBEI YONGGUANG LINE EQUIPMENT CO.,LTD	Our inventory encompasses stainless steel machine boltscrafted from high-quality materials, inclu...
	Hot Line Tap Clamp	Продавец: HEBEI YONGGUANG LINE EQUIPMENT CO.,LTD	China hot line tap clampis a tool used for connecting and fixing electrical equipment. In power s...
	Glass Electrical Insulator	Продавец: HEBEI YONGGUANG LINE EQUIPMENT CO.,LTD	An insulating device made of glass called a glass powerline insulatorsis used to support and shie...