Good quality RS232/485 to 4-20mA Signal Converter
Model Selection:
ISODA O□- □
Output voltage or current value Communication Interface
O1:4-20mA 485: out is RS-485 interface
O2:0-20mA 232: out is RS-232 interface
O4:0-5V 232/485:out is one RS232 or RS485 interface
O5:0-10V (Key-press Choice)
O6:1-5V
O7:0-±5V
O8:user-defined
O9: 0-±20mA
O10: 0±10V
Note:When interface type is 232/485, default is RS485 output, user can switch between RS485 and RS232 by pushing down 2 buttons inside the chassis. When both buttons are pushed down, output is RS232,or is RS485 output.
Example:
1. ISODA O1-485 Means 4-20ma signal output,output is RS485 interface
2. ISODA O4-232 Means 0-5V signal output,output is RS232 interface.
3. ISODA O7-232/485 Means 0-±5V signal output,output is RS485 or RS232 interface
(Key-press Choice)
General Parameters
(typical @ +25℃,Vs is 24VDC)
Outputs: Voltage / Current
Accuracy: 0.2%
Output Maladjustment: current output ±0.5 uA/℃,voltage output ±0.1mV/C
Temperature Drift: ±20 ppm/℃(±30 ppm/℃,max)
Output Resistance: current output 350Ω (4-20mA/0-20mA/0-±20mA output)
Voltage output 10mA (0-5V/0-10V/0-±5V output)
Communications
Protocol RS-485 or RS232 ASCII format,MODBUS
Baud Rates Software Selectable (300、600、1200、2400、4800、9600、19200、38400bps)
Address (0~255) Software Selectable
Response Time: 100 ms,max
Operation Power Supply: +8~50VDC
Power Loss: <1.5W
Operation Temperature: - 45 ~ +80℃
Operation Humidity: 10 ~ 95% (non-condensing)
Storage Temperature: - 45 ~ +80℃
Storage Humidity: 10 ~ 95% (non-condensing)
Isolation Input/Output: 3KVDC,1 minute,leak current:1mA
Interface and power supply are common-ground.
Endure Impact Voltage: 3KVAC,1.2/50us(peak value)
Mechanical Dimensions: 83 mm x 37 mm x 51 mm
Отправить запрос, связаться с поставщиком
Другие товары поставщика
DC Current/Voltage to RS485/232 A-D Converter Support Modbus RTU SYAD | Analog data acquisition isolated AD conversion amplifier module. Shunyuan technology patented products Product Description 2-Channel/4-channel DC C... | |
2-wire Passive 4-20ma loop power Isolation Converter | 2-wire Passive I/V Conversion Isolation Transmitter 2-wire Passive 4-20mA to Voltage Signal Isolation Converter 2-wire 4-20mA to Voltage Transmitt... | |
SY LED2 panel Passive 4-20mA Current Loop LED Meter | .Directly display input current loop value, convenient to debug and monitor. .-3 1/2 bit LED digital display, high precision, display resolution la... | |
2019 Top Selling 0-±10V/4-20mA to Ethernet Converter | Two/Four-channel 0-75mV/0-5V/0-±10V/4-20mA/0-±20mA to RS232/RS485 Converter with LED Display Model selection: SYAD 02/04B - U(A)□ 02/... | |
Isolated 4-20mA/0-5V to RS232/RS485 Converter (A-D Converter isolation among each channel) ISO AD16 Series-16-ch | Analog data acquisition isolated AD conversion amplifier. Shunyuan technology patented products Product Description 16-channle Analog Signal RS232/... |
Похожие товары
3-9.6kW Split Phase Hybrid Inverter | Продавец: Shanghai Sunplus New Energy Technology Co., Ltd | Product Description The are designed to increase energy independence for homeowners. The power... | |
3-25kW String Inverter Three Phase | Продавец: Shanghai Sunplus New Energy Technology Co., Ltd | Product Description The Sunplus BNT Series are designed for residential and small commercial P... | |
1-4.6kW AC Coupled Inverter | Продавец: Shanghai Sunplus New Energy Technology Co., Ltd | Product Description (1kW-4.6kW) suitable for both single-phase & three-phase systems. It c... | |
Rated Power 2400W 24VDC Solar Inverter | Продавец: Shenzhen BaoEr Energy Technology Co., LTD. | Rated Power 2400W 24VDC Solar Inverter The DC 2.4 kw inverterwith a rated power of 2400 watts is... | |
Rated Power 2400W 24VDC PV Inverter | Продавец: Shenzhen BaoEr Energy Technology Co., LTD. | Rated Power 2400W 24VDC PV Inverter This is a single phase inverter rated at 2400 watts, 24 volt... |