Electric Meter High Sensitivity 1:2500 Current Transformer
1.Regular spec: 10 (100)A/4mA
Other spec can be request
Dielectric strength: not less than 4kV/1mA/1min
Insulation resistance: >500M Ohm (500V DC)
Operating temperatures: -40 to +85 Degrees Celsius
Relative humidity range: less than or equal to 95% (25 Degrees Celsius)
Altitude: less than or equal to 10000m
High precision
Suitable for kWh meter class 0.2, class 0.5, class 1.0.
Very reliable and stable performance at different temperature conditions
The primary lead wire can be linked to the connector directly
Fully enclosed case, with high function of current Isolation and nice outline.
2.Regular spec: 1 (20)A/0.4mA other spec also can be requested
Housing material: anti-burning ABS.
Encapsulation: epoxy resin.
Ambient temperature: -40 Degrees Celsius - +85 Degrees Celsius.
Insulation resistance: more than or equal to 500M Ohm (DC 500V).
Dielectric strength: 4000V/1mA/1min.
High accuracy, excellent linearity performance.
The primary is LED out by copper conductor which can be installed to the meter connector directly.
Linear output with high accuracy current.
DC immunity function.
3.Regular spec: 5(100)A/2mA
Other spec can be requested
DC immunity
Dielectric strength: not less than 4kV/1mA/1min
Insulation resistance: >500M Ohm (500V DC)
Operating temperature: -40 to +85 Degrees Celsius
Relative humidity: less than or equal to 95% (25 Degrees Celsius) Altitude: less than or equal to 10000m
High precision
Suitable for kWh meter class 0.2, class 0.5, class 1.0.
Typical AC current measurement error is within 0.02% at Ib test point
Typical phase shift is at 1-10', additional compensation is not needed
Fully enclosed case, with high function of current isolation and nice outline;
4.Regular spec: 5(60) A/2.5mA 0.1CLASS 20 Ohm
Other spec can be requested
Dielectric strength: not less than 4kV/1mA/1min
Insulation resistance: >500M Ohm (500V DC)
Operating temperature: -40 to +85 Degrees Celsius
Relative humidity: less than or equal to 95% (25 Degrees Celsius), altitude: less than or equal to 10000m
High precision
Suitable for kWh meter class 0.2, class 0.5, class 1.0.
Typical AC current measurement error is within 0.02% at Ib test point
Typical phase shift is at 1-10', additional compensation is not needed
Fully enclosed case, with high function of current isolation and nice outline
Другие товары поставщика
Все товары поставщика
Похожие товары