.

0.1mm No-clean Flux Core Wire Solder Sn96.5Ag3.0Cu0.5

Product DetailsNo-clean flux core wire solder 0.1mm~3.0mm BBIEN LF-01 Sn96.5Ag3.0Cu0.5Brief Introduction for LF-01 Sn96.5Ag3.0Cu0.5 solder wireThe solder wire LF-01 Sn96.5Ag3.0Cu0.5 is tin based lead freeno clean solder wire,it is a new development for automated,robotized and manual high tech soldering.Its very low flux spitting guaranties a minimum of equipment cleaning while increasing the soldering quality.The solder wire flux is based on a halide activated synthetic resin composition,which ensures his good wetting properties.Soldering AdvantageIts clear residue allows easy inspection of solder joints and the very low spatter rate ensures board cosmetics and user comfort are maintained.All this translates to a safe and environmentally compliant product that is operator friendly while maintaining high levels of productivity.BBIEN LF-01 Sn96.5Ag3.0Cu0.5 made 0.1mm~3.0mm no clean soldering wire is recommended for use in any hand soldering application where high flux activity is desired.It was developed to provide superior wetting performance for hand soldering in theelectronics industry.The chemistry is based on some of the same principles that have been safely used for years in mildly activated rosin fluxes.The use of LF-01 silver solder wire results in an extremely clear post-soldering residue without cleaning.The unique chemistry in Sn96.5Ag3.0Cu0.5 was also designed to reduce spattering common to most core fluxes.Sn96.5Ag3.0Cu0.5 can be used for both leadbearing and lead-free soldering.ApplicationThe BBIEN LF-01 Sn96.5Ag3.0Cu0.5 Pb free solder wire is suitable for both manual and machine soldering of electrical and electronic components.The flux residues do not need to be removed.Sn96.5Ag3.0Cu0.5 lead free no clean solder wire is specifies compliance to the IPC J-STD-004B ROL0 standard.It is ideal for electronic assemblies used in tomotive,Consumer Electronics,Computer and peripherals,Mobile devices and all types of Au household appliance applications.As well as apply to High-precision medical instrumentation.Application notesUse a soldering iron tip size and form to suit the operation:small tips for soldering large components may prevent the formation of a joint or slow the process down.Select a solder wire diameter to suit both the soldering iron tip and the parts/components to be soldered.Soldering iron systems should provide sufficient heat to satisfy the requirements of the points above.A typical solder tip temperature would be between 215°C and 235°C above the liquidus temperature of the alloy.The ideal temperature to use is depend on how thermally demanding the assembly is.Cored solder wires can be provided in different grades of alloy so always ensures that you have selected the right gradefor the application.Feature of Sn96.5Ag3.0Cu0.5 soldering wireHigh temperature anti-oxygen satisfactory soldering joint and favorable fluidity.Solder joints are filled,and firm.Both RA and RMA are made in complicance with IPC J-STD-006 and JIS Z3283 class AA standards.All these solder flux can be dissolved in solvent,featuring a little smoke and very few splatters.Diameter:above 0.1mm(0.1mm,0.2mm,0.3mm,0.4mm,0.5mm,0.8mm,1.0mm…)Very fast wetting;Very low flux spatterGood spread characteristicsVery low levels of fumesClear non-tacky residueProvides good joint appearanceHalogen and Halide FreePerformance Characteristics:Colorless translucent residuesImproves wetting performanceExcellent solderability and fast wetting to a variety of surface finishesEliminates the need and expense of cleaningLow smoke and odorLow spatteringCompatible with leaded and lead-free alloysClassified as ROL0 per J-STD-004Compliant to Bellcore GR-7896.5Ag3.0Cu0.5(SAC305)soldering wire is low tendency of spitting,transparent residues and high thermal capacity,it produces very clean solder joints.As there is nearly no spitting,your soldering machine requires less servicing and you will have less shutdown periods.AvailabilitySn96.5Ag3.0Cu0.5 lead free silver soldering wire is available in a wide variety of types and sizes.1. Flux core type of solder wire and no flux core(solid)type of solder wire2. No clean type of silver solder wire3. Halogen-free type of solder wire and haloids type of solder wire.4. Acid type of solder wire5. 0.1mm ultrafine solder wire6. Many sizes of 0.15mm,0.2mm,0.3mm,0.5mm…3.0mm solder wires are all availableFlux core percentage are1.1%,2.2%and 3.3%.Packing sizeThe tin solder wire could be classified as reel packing and tube packing type.Each spool/roll holds the solder wire is 500g;Each tube can load the solder wire is 13g/piecePacking:Specificationcore solder wire/solid wireAppearanceBright alloy appearancePacking50g,100g,200g,250g,500g 500g,1kg,2kg per reel/bobbion;10kg/carton:40kg/cartonTube packing:13g/tubeSize of 10kg carton:36x18x200pxSize of 30kg carton:36x18x650pxCleaningBBIEN LF-01 SAC305 Pb free solder wire’s flux residues are non-corrosive,non-conductive and do not require removal in most applications.IPA will not clean the residues off the surface of the circuit board after the soldering process.Storage and Shelf LifeThe shelf life of NNIEN LF-01 Sn96.5Ag3.0Cu0.5 no clean solder wire is based on the chemistry of the flux core and the protective alloy covering of the wire.When stored in a dry,non-corrosive environment between 10°C-40°C(50-104°F),the shelf life of wire may be nearlyFlux-cored solder wires alloys have a 1-3 year warranty from the date of manufacture.Over time,the surface of wire may lose its shine and appear a dull shade of gray.This is a surface phenomenon and is not detrimental to product functionality.Exported CountriesUntil now,BBIEN’S LF-01 Sn96.5Ag3.0Cu0.5 lead free no clean silver solder wire have been exported to many countries,e.g.America,South Korea,Japan,France,Germany…We are appreciated you are the next clients/cooperator with BBIEN.Other informationPayment generally with T/T;L/C at sight is acceptable,Western Union and Paypal are also available.OEM logo can be discussed with MOQ.Delivery time:within 7working days after confirming payment if quantity bellowing 10 tonsProduction ability:more than 80tons each month for normal diameter above 1.0mm,1kg/spool.Other sizes please contact BBIEN.Certificate:SGS,ISO9001:2008;RoHS,REACHTechnical DatasheetNo-clean flux core wire solder BBIEN LF-01 Sn96.5Ag3.0Cu0.5Specification DataProduct TypeSolder wire Sn96.5Ag3.0Cu0.5BrandBBIENMaterialTin-Silver-Copper alloyCompositionSn,Ag,CuMelt point217degreeFlux content1.5%,2.0%,3.0%or no fluxApplicationMetal soldering,electronicsDensity(g/m^3)8.3Diameter0.1mm,0.2mm,0.3mm,0.4mm,0.5mm,0.7mm,0.8mm,1.0mm,1.2mm,1.5mm.2.0mm.3.0mmWeight1000g/pcs,500g/reel,250g/roll;100g,50gTypeNo clean Pb free solder wirePlace of originGuang dong,ChinaCertificateSGSKeywordTin silver copper lead free solder wireSolder wire;no clean solderSolderPacking Details InformationSpecificationcore solder wire/solid wireAppearanceBright alloy appearancePacking50g,100g,200g,250g,500g 500g,1kg,2kg per reel/bobbion;10kg/carton:30kg/cartonTube packing:13g/tubeSize of 10kg carton:36x18x200pxSize of 30kg carton:36x18x650px50g/roll:240rools/export carton:G.W-14kg;Size of Carton:36*26*450px100g/roll:120rolls/export carton:G.W-13.5kg Size of Carton:36*26*450px200g/roll:120rolls/export carton:G.W-26.5kg Size of Carton:36*26*450px500g/roll:51/rolls export carton:G.W-27.5kg Size of Carton:36*26*450px1kg/roll:40rolls/export carton:G.W-41.5kg Size of Carton:36*26*450pxSpecification and chemistry componentSpecificationSn99-Ag3.0-Cu0.5AppearanceLucent,no dirt on wire surfaceChemistry componentSnAgCuPbSbBiZnFeAlAsCd96.53.00.5±0.2<0.01<0.02<0.01<0.003<0.02<0.001<0.03<0.002Physical CharacteristicAlloy componentMelting pointProposion g/cm3Rigidity HB Conduct heatM.S.KExtendMpaExtendrate%Conductivity%Sn96.5Ag3.0Cu0.52277.4964324816.0Advantage And Service0.1mm no-clean flux core wire solder BBIEN LF-01 Sn96.5Ag3.0Cu0.5Products Advantage.BBIEN is specialized in soldering industry from 2000, known as a experienced tin lead and lead free solder wire manufacturer, whose products are made in China,since then,BBIEN pays high attention to Research and Development,continuous technical innovation for pb and pb free solder wire industry,until now,we accumulate much valuable experience,five senior solder wire engineers operate a specialized reflowing solder wire production.High temperature no clean solder wire TL-01 BBIEN Sn96.5Ag3.0Cu0.5 offers excellent solderbility,wettibility and reliability among leaded Pb contained solder wire, it is available in a wide product lineup according to the required soldering temperature.Due to sophisticated technical in Sn-Ag-Cu alloy,BBIEN can supply the thinnest diameter size to 0.1mm for TL-01 BBIEN SAC305,SAC0307,SnCu0.7 no clean solder wire, normal size such as 0.2mm, 0.3mm, 0.5mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm,2.0mm solder wires are all available.TL-01 BBIEN SAC305 tin-silver-copper no clean solder wire can be not only applied to tradional electronics pcb,electronics soldering,but also its application for some new hi-tech industry, semiconductor. LED, aerospace, automotive.BBIEN TL-01Sn96.5Ag3.0Cu0.5 (SAC305) high temperature 217 degree Celsius RoHS standard soldering wire can be packaged with spool ,general 500g,1000g which is used for both hands soldering and air soldering technique;it can also be packed with 15g tube,name tube soldering wire.Thanks to BBIEN long-term unremitting R&D for solder technique,until now,BBIEN have the following high-tech solder product for different lead free alloy.No clean lead-free soldermelting point °CTensile strengthelongation reat%expansion rate%DiameterApplicationSolder wire alloySolder bar/block alloySolder paste alloySolder powder alloySn99.3Cu0.7227304570≥0.1mmlow cost, the most commonly used; Lead-free solder for general weldingyesyesyesyesSn96.5Ag3.0Cu0.5217405878≥0.1mmhigh cost, relatively bright spot;high performenceCan be excellent for demanding welding yesyesyesyesSn99.0Ag0.3Cu0.7Sn64Bi35Ag1189405070SMT,PCByesnotyesyesSn62Pb36Ag2189385475SMT,PCByesnotyesyesSn42Bi≥0.5mmHigh costyesnotyesyesShipping AdvantageMutiple-transportation oversea shipping ways by ari,by sea,by train and truck road way ensuring the shipment can arrive at destination all around the world safety,quickly and efficiently.Shipment can be deliveried once placing order 2 to 10 working days.Shipment will be regular go through local custom and its warehouse,BBIEN has own specialized shipping team and operators agent all over the world.Technical AdvantageBBIEN can share the datasheet for our product to our clients.Certificates of compliance,SGS,ISO and COA,MSDS,are available.We are tyring to make our product quality system more and more complete,BBIEN also appreciate your precious suggestion.Both pre-sale and after-sale,BBIEN have skilled person to follow-up our client,reply answer for reasonable price,relevant quality standard,products data informations,shipping for your questions skillfully, quickly, technical support is available.ServiceWhen you send us message,BBIEN will feedback you general within 2 working hours.Our customer service or sales person will be match with you above 10-24hours.And solve your problem on solder products.OEM is available according to your own logo.Return back to societyBBIEN also participates public benefit activities,return back to society.We support and want to create a environmental friendly society together with people.We also try our best to help someone who need us.Payment way:A variety and flexible of payment terms,T/T,western union,paypal,L/C can be acceptable.


Отправить запрос, связаться с поставщиком

Кому: SHENZHEN BBIEN TECHNOLOGY CO.,LTD
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Product DetailsBBIEN LF-03 SAC305 lead free wave silver soldering barProduct’s Introduction forSAC305BBIEN LF-03 SAC305(Sn96.5Ag3.0Cu0.5)is a lead-...
Product DetailsAcid Pb flux core solder wire BBIEN TL-04 Sn55Pb45BBIEN TL-04 Sn55Pb45 leaded no clean flux core tin solder wire are cored solder wi...
Product DetailsBBIEN TL-02 Sn62Pb36Ag2 lead silver solder powder (type3~type7)Introduction for Sn62Pb36Ag2 powderMixed with specific fluxes, Solder...
Product Details138degree melting low temperature solder paste LF-05 Sn42Bi58Brief Description for LF-05 Sn42Bi58LF-05 Sn42Bi58 Pb-free tin bismuth ...
BBIEN LF-04 Sn99Ag0.3Cu0.7 high quality melting solder barSn99Ag0.3Cu0.7 solder bar descriptionBBIEN LF-04 SACX0307(Sn99Ag0.3Cu0.7) is a antioxidan...
Все товары поставщика

Похожие товары

Adjustable Modular LED Flood Light (TGD03)
Adjustable Modular LED Flood Light (TGD03) Продавец: Guangzhou Anern Energy Technology Co., Ltd AN-TGD03 series led modular flood lighting is an engineering lighting fixture with adjustable LED...
Adjustable bracket LED street light(SLH6)
Adjustable bracket LED street light(SLH6) Продавец: Guangzhou Anern Energy Technology Co., Ltd The AN-SLH6 series adopts the LED modular design, which can adjust the power flexibly by adding o...
Adjustable LED Module All In One Solar Street Light (SLA)
Adjustable LED Module All In One Solar Street Light (SLA) Продавец: Guangzhou Anern Energy Technology Co., Ltd AN-SLA series is the latest solar street light model independently developed by Anern. This serie...
600*600 LED Panel Light(IPM03C/FPL)
600*600 LED Panel Light(IPM03C/FPL) Продавец: Guangzhou Anern Energy Technology Co., Ltd AN-FPL series led 600x600 36w panel light are new straight-emitting panel lights developed by Ane...
4.2KW-10.2KW Home Hybrid Solar Storage System
4.2KW-10.2KW Home Hybrid Solar Storage System Продавец: Guangzhou Anern Energy Technology Co., Ltd The household solar power supply systems are mainly aimed at home users. With the maturity of sol...